• Notice regarding image hosts and attachments. See here.

Struggling To POST

Soldato
Joined
29 Mar 2007
Posts
4,752
Location
Swindon UK
Got all the bits assembled in the case for the rebuild but now find the computer will not POST.

Components are:
ASUS P8Z68-V LX Motherboard
Intel I5 Sandybridge 2500k LGA 1155
Corsair XMS 8Gb RAM.

I also added a new PSU G7 Modular as the old Hiper did not have the 8 pin EATX auxiliary connection (just 6 pin).

All leads and power leads connected up and the green LED on the motherboard is on, but pushing the power on button nothing happens other than a couple of times the CPU fan has started to spin, then stopped.

The front switch connectors are all pushed down on the pins and I've checked inside the front panel all the switches are connected.

So I'm at a loss here as to what is wrong, probably something simple but any advice appreciated.
 
Sounds like either a faulty board or more or likely, a PSU problem.

Try a other PSU (8 pin not always needed, mainly there for extra power for overclocking etc)...

If the same, then it's the board.
 
Did it boot with the old PSU? If so, then just try it again (Dont need to remove the other one, just put the main leads in the motherboard). Try reseating RAM too and power switch cable to be sure.
 
Sorry, I accidentally posted the situation update in another thread.

Turned out the new PSU I bought locally was faulty, took it back and changed it for one that works.

However although the system is now powering, it appears the RAM I bought along with the other parts was not compatible as the system still not POSTING, the RAM warning red light appearing on the mobo. Holding down the failsafe button to run the compatability test did not clear the issue.

RAM now RMA'ed for posting back to OCUK on Monday, new RAM which is listed in the manual on order from another source but probably not here until Wed or Thur. Will try that, if still no joy then maybe OCUK have sold me a faulty motherboard, in which case it can also get RMA'd along with the CPU.
 
Back
Top Bottom