• Notice regarding image hosts and attachments. See here.

suggestions on rads please

Associate
Joined
17 Feb 2011
Posts
185
hi am looking at water cooling the following and am wondering what rads will be best was thinking a EK Water Blocks EK-CoolStream RAD XTX 360 rad and 240 .
EK Water Blocks EK-CoolStream RAD XTX rad using a Laing 18W DDC-Pump 12V DDC-1T Plus with top will the above rads and pump do the job also what mb block should i go for


x 2 EVGA GeForce GTX 580 SuperClocked w/Backplate 1536MB GDDR5 PCI-Express Graphics Card
£329.99


Intel Core i7-2600K 3.40GHz (Sandybridge) Socket LGA1155 Processor - Retail
£233.99

Gigabyte Z68X-UD3H-GEN3 Intel Z68 (Socket 1155) DDR3 Motherboard
£122.98

kind regards
 
Last edited:
don't bother with MB block, really unnecessary for 90% or users.

Get a d5 for your loop as there'll be a load of restriction.
 
in that case any of the thick low fpi rads will be fine. A thick with 3 fans will be quieter and have similar performance to a thin with 6
 
ddc 18w would be fine for that setup.

what is this fascination with the D5?


I would suggest SR1 rads for your system with some 1850rpm gentle typhoons on them. push pull is unnecessary.
the DDC pump you mention is fine.

dont bother with a motherboard block unless you want to thrash your hardware or just want it for aesthetics.

motherboard blocks are a good idea if you are serious about overclocking.
 
ddc 18w would be fine for that setup.

what is this fascination with the D5?


I would suggest SR1 rads for your system with some 1850rpm gentle typhoons on them. push pull is unnecessary.
the DDC pump you mention is fine.

dont bother with a motherboard block unless you want to thrash your hardware or just want it for aesthetics.

motherboard blocks are a good idea if you are serious about overclocking.


Indeed the push pull with GT's is completely pointless i tested it and GT's suck at pulling almost no improvement at all.
 
Back
Top Bottom