Table tennis bat

bolterixus said:
What is going on here, I am so confused.
I have only asked if adidas p7 is spinnier than bryce speed fx lol
Click to expand...


Important conjugated dienes used in synthetic rubbers include isoprene (2-methyl-1,3-butadiene), 1,3-butadiene, and chloroprene (2-chloro-1,3-butadiene). Polymerized 1,3-butadiene is mostly referred to simply as polybutadiene. Polymerized chloroprene was developed by DuPont and given the trade name 'p7'.
In a number of cases, monomers which are not dienes are also used for certain types of synthetic rubber, often copolymerized with dienes. Some of the most commercially important addition polymers are the copolymers. These are polymers made by polymerizing a mixture of two or more monomers. An example is styrene-butadiene rubber (SBR) - which is a copolymer of 1,3-butadiene and styrene which is mixed in a 3 to 1 ratio, respectively and called 'fx'.


Hope that clears everything up for you.
 
bolterixus said:
I do know what I am saying about but what do u mean about the composition of the handle, What composition?
Click to expand...

The composition is the materials from which the handle is made, and how much of each. Some are pure wood, some have plastic, some are pure plastic and the very expensive ones have a graphite top to increase stiffness of the bat but for these you're looking at about £200 before you add the grease and tightening bolts.

You need this information to decide how you want to achieve the right spin, it's not just a case of "do this, get x result".

Bats come in all different composites, without that info I can't be much more help I'm afraid.

It should be with the book of authenticity if you have a Concours Rated bat, if not you'll have to get in touch with the manufacturer to find out.

Does the bat have a serial number on it anywhere?
 
doofer said:
Important conjugated dienes used in synthetic rubbers include isoprene (2-methyl-1,3-butadiene), 1,3-butadiene, and chloroprene (2-chloro-1,3-butadiene). Polymerized 1,3-butadiene is mostly referred to simply as polybutadiene. Polymerized chloroprene was developed by DuPont and given the trade name 'p7'.
In a number of cases, monomers which are not dienes are also used for certain types of synthetic rubber, often copolymerized with dienes. Some of the most commercially important addition polymers are the copolymers. These are polymers made by polymerizing a mixture of two or more monomers. An example is styrene-butadiene rubber (SBR) - which is a copolymer of 1,3-butadiene and styrene which is mixed in a 3 to 1 ratio, respectively and called 'fx'.


Hope that clears everything up for you.
Click to expand...

Nailed it!
 
I expected better GD! Shame on you

Whether the P7 spins more, will be down to the action of the wrist and the ability of the user.

Unless you are a world class pro, which by your "spinniner" question I am guessing not - just buy whatever the spotty young chap in Sports Direct says.
 
You must log in or register to reply here.
Back
Top Bottom