The Fury(X) Fiji Owners Thread

Mtom · 20 Jul 2015 at 12:02

AMDMatt said:
Demand is outstripping supply at the moment.

Yeah i know the official standing on this

but there seems to be enough Fury around tho.
But why are so much more Fury than X? Are those purposely cut down full chips because AMD thinks they sell better than the X..or are there so few full fat chips that the supply is low?

Mtom · 20 Jul 2015 at 12:04

phiiil said:
Here's my Fury X with EK Acetal/Nickel waterblock and Nickel backplate:

Chewie · 20 Jul 2015 at 12:09

JediFragger said:
Hopefully it's part of the fixed batch!!

Will find out tomorrow and report back

Silent_Scone · 20 Jul 2015 at 12:13

Kaapstad said:
AMD R9 Fury X CrossfireX 12K Eyefinity Review @eTechnix placed in OP.

http://www.eteknix.com/amd-r9-fury-x-crossfirex-12k-eyefinity-review/

That review is terrible lol. From a journalistic perspective at least

Nutella33 · 20 Jul 2015 at 12:18

Mtom said:
Yeah i know the official standing on this but there seems to be enough Fury around tho.
But why are so much more Fury than X? Are those purposely cut down full chips because AMD thinks they sell better than the X..or are there so few full fat chips that the supply is low?

cut down chips tend to have a higher production rate (less surface area for flaws etc) and I imagine the cooler for the X is restricting availability, given most of the ones they produced prelaunch were faulty!

chroniclard · 20 Jul 2015 at 12:33

AMDMatt said:
Nope, tubing is the perfect length. I can fit it anywhere within the Phanteks Enthoo Primo and this case is huge.

Thanks. Was also looking at that case

Dygaza · 20 Jul 2015 at 12:41

Silent_Scone said:
That review is terrible lol. From a journalistic perspective at least

And if ppl test eyefinity, atleast they should included racing sims in them. For real racing eyefinity is almost required to get real feeling. I would never buy 3 monitors for battlefield or gta5.

GoogalyMoogaly · 20 Jul 2015 at 13:35

Boomstick777 said:
Is this your attempt to push bias onto me?

Always saying AMD and Nvidia are as good / bad as each other and I wish there was a third option. I buy cards from both camps whichever I prefer, obviously I would prefer it else why would I buy it? Literally makes no sense.

Poor trolling effort to be fair. Fury X is a great card, pump noise killed it for me. Now I'm using a GTX 980 Ti as there was no Fury X stock and pump issue wasn't clear at time of RMA.

I'm sure this won't stop you saying I have some kind of agenda lol. Good luck with that.

Cheers.

Not saying you have an agenda, simply that you change graphics cards about as often as I blink. And because you're unlikely to buy a card you want less than the one you had your opinion of which card is best changes as frequently.

That's all I was saying, that your opinion of a long long time might be ~1 month given the frequency you change cards.

LoadsaMoney · 20 Jul 2015 at 14:21

phiiil said:
Snip...

That looks ******* gorgeous :eek:

, 'Granville, f fetch a cloth!'

JediFragger · 20 Jul 2015 at 14:50

LoadsaMoney said:
That looks ******* gorgeous , 'Granville, f fetch a cloth!'

Showing your age there old man

Ash0787 · 20 Jul 2015 at 14:53

It has been professionally installed, seems silent so far ( idle ),
I can hear a tiny noise but it might be coming from the cpu VRMs, hard to tell

Gerard · 20 Jul 2015 at 14:55

Apparently this is what the card sounds like with the fixed pump.

Sounds like a bloody fridge. :confused:

RavenXXX2 · 20 Jul 2015 at 15:01

Still too loud for me, I must have whisper silence when PC is idle.

JediFragger · 20 Jul 2015 at 15:15

RavenXXX2 said:
Still too loud for me, I must have whisper silence when PC is idle.

Here's to fans switching themselves off at idle :cool:

Gerard · 20 Jul 2015 at 15:32

JediFragger said:
Here's to fans switching themselves off at idle

Gimmicky imo, with a lot of the 2\3 fan coolers you can't hear them at idle speeds anyway, so not really sure what the big deal is about them stopping at idle. Just makes the card idle at hotter temps.

Mtom · 20 Jul 2015 at 15:36

Gerard said:
Apparently this is what the card sounds like with the fixed pump.

Sounds like a bloody fridge.

TBH i think all these videos are worth crap. My H110 needed 2-3 days if i remember correctly until it worked out all the air bubbles. It had all sort of noise until then...after that..nothing.

JediFragger · 20 Jul 2015 at 15:59

Gerard said:
Gimmicky imo, with a lot of the 2\3 fan coolers you can't hear them at idle speeds anyway, so not really sure what the big deal is about them stopping at idle. Just makes the card idle at hotter temps.

It's still nice, 0db vs 15 or whatever

LoadsaMoney · 20 Jul 2015 at 16:05

JediFragger said:
Showing your age there old man

Rofl

Kaapstad · 20 Jul 2015 at 16:22

phiiil said:
Here's my Fury X with EK Acetal/Nickel waterblock and Nickel backplate:

...and here in the build:

Ash0787 said:
It has been professionally installed, seems silent so far ( idle ),
I can hear a tiny noise but it might be coming from the cpu VRMs, hard to tell

Welcome and TROH updated.

The Roll of Honour.

20/07/2015, Make Reference, Ash0787, Link
20/07/2015, Make Reference, phiiil, Link
05/07/2015, Make Reference, muziqaz, Link
30/06/2015, Make Reference, Gregster, Link
30/06/2015, Make Reference, Silent_Scone, Link
30/06/2015, Make Reference, MDPlatts, Link
30/06/2015, Make Reference, Firefox35, Link
30/06/2015, Make Reference, uksoldierboy, Link
29/06/2015, Make Reference, Sesta, Link
29/06/2015, Make Reference, TheSwede, Link
29/06/2015, Make Reference, whyscotty, Link
25/06/2015, Make Reference, Kaapstad, Link
25/06/2015, Make Reference, Boomstick777, Link
25/06/2015, Make Reference, machinebummer, Link
25/06/2015, Make Reference, AMDMatt, Link

To get on the Roll of Honour all you have to do is post a pic with your user name on it of your Fury X.

Ash0787 · 20 Jul 2015 at 16:23

I dont think it likes Heaven benchmark, score is in between a gtx 970 and a 780 Ti