The New Cases Gallery

Mark A · 4 May 2012 at 11:53

macarule said:
EDIT: heres mine anyway

Are those noiseblocker multi frame fans any good?

I went for the cheaper black silent pro ones. They are quiet but also dont push a great deal of air.

Twirlywoos · 5 May 2012 at 09:03

Finished by build yesterday, waiting on the GPU

Subliminal Aura · 5 May 2012 at 09:46

Wow the Sabertooth looks beautiful

King Damager · 5 May 2012 at 10:09

macarule said:
You can flip the HDDs around, just slide it out and back in with the connections facing the back

King Damager said:
Also I have a back up drive that sits in a fire-proof safe. So that has to be plugged in every couple of weeks to do a back up, so a more easily accessible drive bay is preferable for me really.

That Sabertooth does look pretty good actually

kd

almostgfx · 5 May 2012 at 11:21

that looks really clean nice job majnu.

I wish there was an amd motherboard like that one

Twirlywoos · 5 May 2012 at 11:46

Thanks, it's my first proper build. I just took my time and re-read the manual twice lol

The Corsair H60 comes with 4 long black screws, does anyone know where I can buy 4 more for the exhuast fan attached on the opposite side?

I've tried computer shops, places like b&q and maplins and they don't sell them.

MOOGLEYS · 5 May 2012 at 11:55

Just use two each side in opposite corners will hold it fine.

Twirlywoos · 5 May 2012 at 21:16

MOOGLEYS said:
Just use two each side in opposite corners will hold it fine.

I like things to be purrfect, so I need 4

Seeing those colourful Power Wires are doing my head in already.

Yaayuh! · 5 May 2012 at 23:07

EDIT: Poor pics, will replace soon.

The Phantek heatsink is massive....

almostgfx · 6 May 2012 at 10:49

that heatsink is a beast!

Aeleys · 6 May 2012 at 11:27

almostgfx said:
that heatsink is a beast!

Can say that again, what one is it? lol

King Damager · 6 May 2012 at 11:35

Aeleys said:
Can say that again, what one is it? lol

It's the Phanteks PH-TC14PE.

Rossi, how are you finding the Phanteks fans. I've got a couple lying around, and tried them on full pelt the other day and they were quite noisy. Haven't had a chance to try them with the low noise resistor...

kd

Twirlywoos · 6 May 2012 at 12:07

Which RAM heatsinks in Black are available for the Samsung Green DDR3?

xGBHxPegasus · 6 May 2012 at 13:15

Waiting for Braided cables to come into stock, once they do will clear it up a tad bit more.

adriancal · 6 May 2012 at 14:12

some photo's of the new build, went for a K2 mount doom cooler as all the reports of pump problems with the h100 put me off, and the cooler master eisberg isn't quite available yet. Also was having trouble fitting the hdd bay
at the front of the case with a 200mm spectre pro installed but I can see from an earlier post that its possible so will give that another go.

[/IMG]

setter · 6 May 2012 at 14:15

^Nice build adriancal, the k2 is a great cooler, very impressed with how quiet the stock fans on it are.

Twirlywoos · 6 May 2012 at 14:19

@ Rossi - Your setup is beastly.

@BOBPegasus and adriancal what 200mm fan is that at the front please?

adriancal · 6 May 2012 at 14:30

its a 200mm Bitfenix spectre PRO, I went for the all black model
with no led's. Am going to put another one in the top of the case
next week.

I also used some anti vibration silicone washers between the bitfenix and the case.
Replaced the rear fan with an akasa apache black too.

Jony27 · 6 May 2012 at 14:31

looks like a Bitfenix spectre Pro 200mm.

should've refreshed

Twirlywoos · 6 May 2012 at 15:20

adriancal said:
its a 200mm Bitfenix spectre PRO, I went for the all black model
with no led's. Am going to put another one in the top of the case
next week.

I also used some anti vibration silicone washers between the bitfenix and the case.
Replaced the rear fan with an akasa apache black too.

Jony27 said:
looks like a Bitfenix spectre Pro 200mm.

should've refreshed

Thanks guys