***The Vapers Lounge*** 3.0

[Yas786]

Well I'm truly hooked on rda's now, so much so I'm looking at the twisted messes rda which are highly rated.

Been dripping all day pretty much and the flavour from the tsunami 24 rda just blows me away. At the moment I'm dripping a mango based juice and it's crazy how full if flavour it is.

Not sure I'll stop with my koolada based juices, probably freeze my throats lol.

 

[Gilbert89]

Well I'm truly hooked on rda's now, so much so I'm looking at the twisted messes rda which are highly rated.

I have the Twisted Messes 24 and I absolutely love it! The build deck is great and what I love about this RDA is being able to just dump juice down through the drip tip.

 

[slinxy]

Btw. Anyone elses pico been like mine as in the metal coating coming off on the fire button and the rim to reveal a red copper colour? Didnt expect mine to but has.

no, I thought it was a solid stainless steel button.. some of the coating has rubbed off the side thou.

------

On the subject of charging via mods.. I mainly charge my batteries with a charger, a good charger cost around 20-30 pounds and can extend the life of batteries. Most onboard charging from mods are like 0.25-0.5 amps, while I charge my batteries at 1 amp.

If you're taking the batteries out of swap the order, like you should be in a multiple battery configuration setup, you might as well charge them at the same time.

My pattern is quite simple, I have two batteries that I use to swap around in the mod that I'm using for the day. Once one is flat, I swap it for the other; when I get home I charge the one that is flat ready for the next day, a battery last me about a day. Them two batteries get replaced around 7-9 months for a new pair as they take a beating.

Of course I have a few batteries that are dedicated a mods, if they are a PITA to swap out, if I use that mod everyday, or if they are not 18650s mod.

I have two pairs of 18650s too, one pair for series and one pair for parallel, they get replaced with a new set if and when needed.

I also have a set of three married batteries for triple batteries mods.

--------------

I got the pico squeeze, conqueror mini and mage GTA today, I wanted to use the squeeze with my hobo v3, to use as a beater but the 510 is too long for it to sit on the mod correctly so I think I might have to look for another bf dripper.

The conqueror mini is a PITA to coil, but it vapes really really well, very impressed by the vape. The threads are pants but so was the threads on my serpent mini till they warn in.

Mage GTA is meh, i wanted a cheap coil top atty as beater, I really like the origennies but this designed for a single massive wire coil, making it a PITA to build again.

I normally find building quite a relaxing and claming process but I was close to losing my rag with the two atties, but I haven't built a tank in quite a while as I've mainly been using bf drippers.

 

[easyrider]

Do we need this thread?

What is it?

Vaping is the act of vaporising a nicotine solution and inhaling the resultant vapour to provide a nicotine dose similar to if a cigarette was smoked.
This link will tell you what all the jargon means but don't worry if you don't understand much of it:

It encourages idiotic behaviour. looking daft in public places and getting fleeced

 

[enigma27]

Do we need this thread?



It encourages idiotic behaviour. looking daft in public places and getting fleeced

Mate what is your problem tonight.. we not aloud to discuss things we do now? if you don't like doing it then that's up to you?

You drink?? i have same views on alcohol and the behavior its invokes in people but i don't go around bashing..

Honestly give it a rest.. I see some of your other posts tonight seem to be trying to invoke people into arguments.

 

[Krono5]

My fast tech orders been floating around in Beijing for over a week and has now been delivered in Beijing wtf?
https://track.aftership.com/LX259261514CN?

I take it this means it's been returned at customs even though there's no batteries or eliquid in the order?

I might just order everything from the UK now as it's not that much more expensive and I'm thoroughly ****ed off at this point.

 

[pgi947]

My fast tech orders been floating around in Beijing for over a week and has now been delivered in Beijing wtf?
https://track.aftership.com/LX259261514CN?

I take it this means it's been returned at customs even though there's no batteries or eliquid in the order?

I might just order everything from the UK now as it's not that much more expensive and I'm thoroughly ****ed off at this point.

Have you used China post? anything within the shipping consignment (so not just your stuff) that is suspect, liquids, blades etc...Now stops the whole lot, my last (and I mean last) CP order had a 3 week tour of China before being sent to the UK because of this.

We now highly recommend epacket express, $1.49 to guarantee 5-10 day delivery, averages around 6 days.

 

[Yas786]

I have the Twisted Messes 24 and I absolutely love it! The build deck is great and what I love about this RDA is being able to just dump juice down through the drip tip.

Pretty much the same as the tsunami24 rda that I'm using at the moment, lots of space for big coils and like the twisted messes, you can just drip liquid down the drip tip.

Although at the moment I haven't got the hang of it as I tend to get plenty of leaks but that's probably to do with the fact that I'm over dripping down the drip tip.

 

[Krono5]

Have you used China post? anything within the shipping consignment (so not just your stuff) that is suspect, liquids, blades etc...Now stops the whole lot, my last (and I mean last) CP order had a 3 week tour of China before being sent to the UK because of this.

We now highly recommend epacket express, $1.49 to guarantee 5-10 day delivery, averages around 6 days.

Yeah I used Epacket. I've asked for a refund now and started ordering everything from the UK. It's not actually that much more expensive using Vampire Vape and their 10% discount, It's come to the same price minus the $30 coil building kit I had from FT.

 

[easyrider]

http://www.pbs.org/wgbh/nova/next/body/vaping/

 

[pgi947]

Yeah I used Epacket. I've asked for a refund now and started ordering everything from the UK. It's not actually that much more expensive using Vampire Vape and their 10% discount, It's come to the same price minus the $30 coil building kit I had from FT.

Must have been unlucky or have had a mix up somewhere in the dispatch process, epacket is usually spot on. The poor relative pricing at the moment is mostly due to the pound being weak against the dollar, that said something's are still lots cheaper via FT...I ordered an evic primo, that is in the UK for £50 for £26

You should get refunded, one thing I really like about FT is their customer service is usually very good.

 

[oHUTCHYo]

Delighted with my Fatboy tank for Cleito120

 

[Stan_Lite]

Got off the rig early yesterday and decided to stay the night in Aberdeen for a change. I only had MTL tanks with me so I popped into a vape shop on Union street to see what they had in the way of sub-ohm tanks. I settled on a Smok Baby Beast. Been using it with the 0.4 ohm coil supplied with it and some Apple Doughnut juice I got from the same place. Great flavour from the Beast and nice juice as well.

 

[pgi947]

Got off the rig early yesterday and decided to stay the night in Aberdeen for a change. I only had MTL tanks with me so I popped into a vape shop on Union street to see what they had in the way of sub-ohm tanks. I settled on a Smok Baby Beast. Been using it with the 0.4 ohm coil supplied with it and some Apple Doughnut juice I got from the same place. Great flavour from the Beast and nice juice as well.

Take it you went to vaporized then?

 

[Stan_Lite]

Take it you went to vaporized then?

Vape Scotland actually.

 

[pgi947]

Vape Scotland actually.

There not too bad, didn't think they stocked smok stuff though! Last time I was in they only did joyetech/wismec stuff and vaporized was for smok gear

Should really pop in sometime, there pricing is normally pretty good for a b&m!

 

[Stan_Lite]

There not too bad, didn't think they stocked smok stuff though! Last time I was in they only did joyetech/wismec stuff and vaporized was for smok gear

Should really pop in sometime, there pricing is normally pretty good for a b&m!

Yeah. They seemed to be competitively priced. My Baby Beast was only £24 - £2-£3 cheaper than most online places.

 

[Gilbert89]

Pretty much the same as the tsunami24 rda that I'm using at the moment, lots of space for big coils and like the twisted messes, you can just drip liquid down the drip tip.

Although at the moment I haven't got the hang of it as I tend to get plenty of leaks but that's probably to do with the fact that I'm over dripping down the drip tip.

I own both the Tsunami 22 & 24 and due to the bottom airflow the juice well capacity is reduced which makes it very easy to flood the Tsunami but you just got to be careful how you drip compared to an RDA like the TM24 for example which has a larger juice well along with side airflow.

If you've had enough of worrying about over dripping because of the bottom airflow yet want a Velocity style deck it's worth a look at the Troll V2 RDA which gets great reviews from folk within this thread and it's not expensive either.

 

[pgi947]

The only real way I found to avoid over dripping on the Tsunami 24 is to squonk with it!

+1 for the Troll V2, I've got the 25mm version and love it, iirc it cost me something like £24 from a UK vendor.

 

[Yas786]

I own both the Tsunami 22 & 24 and due to the bottom airflow the juice well capacity is reduced which makes it very easy to flood the Tsunami but you just got to be careful how you drip compared to an RDA like the TM24 for example which has a larger juice well along with side airflow.

If you've had enough of worrying about over dripping because of the bottom airflow yet want a Velocity style deck it's worth a look at the Troll V2 RDA which gets great reviews from folk within this thread and it's not expensive either.

Yeh I'm looking at either the troll rda v2 or the twisted messes rda.

As for flooding on the tsunami 24, in now just dripping onto the coils rather than straight down the drip tip. I've got both airflow holes open as I'm running a dual clapton setup running at .30 ohm. Otherwise closing off one hole makes it just too hot to vape.

I take it the TM doesn't leak as much when dripping down the drip hole??