Think I Blew My Board !

Bint Box

Bint Box

Bint Box

Associate
Joined
22 Dec 2009
Posts
1,375
Location
Upper Skurt
I was cobbling together a few older parts to build a PC and forgot to plug in the board power cable to the PSU.
Turned it on with the board power missing, all other cables connected OK, board will not boot into the BIOS, I think I bítched it up good and proper.

It was the 8 pin power connector that is generally located at the top left corner on ASUS boards that was missing its connection into the PSU.
The board was a Maximus IV Extreme Z, an old board but still does the job for a basic spec PC.

I tried to get it to boot to a BIOS ROM on a USB PC but no joy.
Is it a gonner or any chance of getting it back to life?

Thx
 
Last edited:
Forgetting the 4/8 pin is very common, it is unlikely to be your problem.

E.g. more likely something like using 3rd gen CPU with an old BIOS.
 
Last edited:
You wont kill a board by not supplying enough power to it, as mentioned above you probably just need to update the bios or something.
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom