I've just built my new I7 2600k build (P8 Z68-VPro / 4*4gig 1866 vengeance). Ive initially clocked it upto 4.0ghz whilst is beds in, its all running fine and I've ran a linx burn for 2 hours and it hits 58 degrees across all 4 cores. Does this seem high considering its under a swiftech appogge block and triple rad.
I've not changed the volts on the CPU, just left it on auto. Obviously there is a chance of air in the loop which will come out with some shaking about. My biggest concern really is that the hold down plate that's holding the block down is a modded s775 one that's been redrilled and I guess there's a small chance it can't apply the correct pressure although unlikely.
Summary: 2600k @ 4.0g max temp 58 degrees after 2 hours 100% CPU linx test.
I've not changed the volts on the CPU, just left it on auto. Obviously there is a chance of air in the loop which will come out with some shaking about. My biggest concern really is that the hold down plate that's holding the block down is a modded s775 one that's been redrilled and I guess there's a small chance it can't apply the correct pressure although unlikely.
Summary: 2600k @ 4.0g max temp 58 degrees after 2 hours 100% CPU linx test.
Last edited:
