TUF GAMING X670E-PLUS DRIVERS/BIOS
- Thread starter Neil79
- Start date
Prior post I highlighted how I'm assuming UEFI 3202 vs 3203 is tweaks on ASUS FW side, as same AGESA, etc.
The like beta UEFIs released for X870E Hero and X670E Hero have become release, no version number change, so release should be same byte for byte as beta from past experience. I think UEFI 3203 will become release on TUF also.
Changelog states support for 4x64GB at 5200MT/s on both those boards. Even though seen some OCN users with higher speed on older UEFIs with higher RAM density in use, perhaps it's easier on these newer UEFIs, ie not needing as much manual tweaks.
The like beta UEFIs released for X870E Hero and X670E Hero have become release, no version number change, so release should be same byte for byte as beta from past experience. I think UEFI 3203 will become release on TUF also.
Changelog states support for 4x64GB at 5200MT/s on both those boards. Even though seen some OCN users with higher speed on older UEFIs with higher RAM density in use, perhaps it's easier on these newer UEFIs, ie not needing as much manual tweaks.
I have read that the chipset drivers need reinstalling after the bios 3203 update.
AMD Application Compatibility Database device.
rog-forum.asus.com
AMD Application Compatibility Database device.
X670 / X870 resource thread
ill use this thread to collect some new test bioses for the boards, maybe also to explain some less understood options to disable cores ccd go here and choose ccd xx bit map down core. each ones stand for an enabled core best to disable from the back, ie: 110000 instead of 0011000 after...
YesI have read that the chipset drivers need reinstalling after the bios 3203 update.
AMD Application Compatibility Database device.
X670 / X870 resource thread
ill use this thread to collect some new test bioses for the boards, maybe also to explain some less understood options to disable cores ccd go here and choose ccd xx bit map down core. each ones stand for an enabled core best to disable from the back, ie: 110000 instead of 0011000 after...
, did say in post here, but stated slightly wrong 
.
Last edited:
I flashed a lot of UEFIs recently to see some things I was interested in. I flashed UEFI 2613 from 17/04/24, big temperature difference between 2613 and 3014 for same test load at stock for CPU/RAM, etc. The UEFI change logs don't state that as a "fix". Change log between 2613 and 3014 is as below
UEFI 2613
Update AGESA version to Combo AM5 PI 1.1.7.0 patch A to support next generation AMD Ryzen™ processors.
UEFI 3014
Update AGESA version to Combo AM5 PI 1.2.0.0a for optimizing next generation AMD Ryzen™ processors performance
Beta 3203 has been good for me, I won't derail thread on my CO profile tweaking, but will leave the link for my thread.
Beta 3207 released, haven't yet flashed, as my rig is on some testing, will soon flash .
The stated change "Change AOD/CBS DRAM Timing Control input value to decimal type" is this menu link and a copy in CBS. Used to be hexadecimal input.
UEFI 2613
Update AGESA version to Combo AM5 PI 1.1.7.0 patch A to support next generation AMD Ryzen™ processors.
UEFI 3014
Update AGESA version to Combo AM5 PI 1.2.0.0a for optimizing next generation AMD Ryzen™ processors performance
Beta 3203 has been good for me, I won't derail thread on my CO profile tweaking, but will leave the link for my thread.
Beta 3207 released, haven't yet flashed, as my rig is on some testing, will soon flash
.The stated change "Change AOD/CBS DRAM Timing Control input value to decimal type" is this menu link and a copy in CBS. Used to be hexadecimal input.
Last edited:
Been using a 9700X instead of the 9600X.
UEFI 3207 static OC has been fine. PBO CO OC fine. RAM OC fine.
AGESA and CPU SMU FW hasn't changed, there seem to be tweaks to ASUS FW in regard to memory. I have noticed changes to marked RTT resistances.
Both cases ProcODT/Resistances values are [Auto], 2x16GB single rank in use, same CPU, etc. I also cross referenced ZenTimings with Ryzen Master and they match, so not read out error in my opinion.
*** edit ***
Change log up on ASUS site.
UEFI 3207 static OC has been fine. PBO CO OC fine. RAM OC fine.
AGESA and CPU SMU FW hasn't changed, there seem to be tweaks to ASUS FW in regard to memory. I have noticed changes to marked RTT resistances.
Both cases ProcODT/Resistances values are [Auto], 2x16GB single rank in use, same CPU, etc. I also cross referenced ZenTimings with Ryzen Master and they match, so not read out error in my opinion.
*** edit ***
Change log up on ASUS site.
Last edited: