two hdds with read errors

Josh_4000 · 30 Mar 2016 at 16:08

i have two hdds with read errors they are both segates both 1 tbs but diffrent modles. im wondring if i should try a nother or just move to toshiba or wd
thanks Joshua

Josh_4000 · 30 Mar 2016 at 20:48

ok will try

Josh_4000 · 30 Mar 2016 at 20:50

one dose not show up any more

Josh_4000 · 30 Mar 2016 at 20:55

[/url]

[/IMG]
i dont know what im looking at :'( why am i geting thes errors

Josh_4000 · 30 Mar 2016 at 21:26

one is from an old extenal hdd that the power brick died and the other one is from overclockers. the one from overclocker ill see what i can do i found the resit for that one

Josh_4000 · 1 Apr 2016 at 15:27

could it be a bad chip on the motherboard?

Josh_4000 · 1 Apr 2016 at 19:33

Danny75 said:
It shows the older disk is getting very hot at times (in CrystalDiskInfo "43" means 100 - 43 = 57C). With airflow temperature, the nearer to 100 the value, the better. On idle, temps on both drives are fine. Of course the readings may still be wrong. Just wonder if that older disk is caked in dust or dust has gotten into it.

A pic of the info in Disk Management, showing all the below, would be nice:

when i tryed the disk managment i clicked on the drive and it stoped responding and than i got this

[/url][/IMG]

Josh_4000 · 1 Apr 2016 at 19:37

the drive has come back but im going to replace them and mobo just to be safe

Josh_4000 · 3 Apr 2016 at 08:19

yesterday I was having a look at my sata cables, I saw that one has a small nip in the wire so it might have been shorting out and slowing down the drive and maybe slowing the controller. so I have order new sata cables. I let you know how it gose