Umm ****

[wt123]

Well I didn't know anything about overclocking so I let my friend do it as he supposedly knew how to do it and did it before, so when he changed it saved settings on BIOS it kinda *** up, when I try to turn the PC on it does a long bleep then stops for like 5 seconds then bleeps again and so on, and I can't seem to get on my PC so my mate can change it back to default. Any help!? or has he *** it up?

Its an E2200 and I don't really know what he changed but I think he changed FSB from 800 MHz to 1066? I think I dunno he also changed the Voltage but I forgot what to lol

 

[stoke1863]

Remove the battery on the Motherboard

 

[Goldfingers]

Well I didn't know anything about overclocking so I let my friend do it as he supposedly knew how to do it and did it before, so when he changed it saved settings on BIOS it kinda f*** up, when I try to turn the PC on it does a long bleep then stops for like 5 seconds then bleeps again and so on, and I can't seem to get on my PC so my mate can change it back to default. Any help!? or has he *** it up?

Its an E2200 and I don't really know what he changed but I think he changed FSB from 800 MHz to 1066? I think I dunno he also changed the Voltage but I forgot what to lol

You need to reset the cmos. Look in your mobo manual.

 

[Hotwired]

Reset it.

Check your mobo manual to find the right jumper, reset the bios with it. Will start again as originally set up.

 

[wt123]

You need to reset the cmos. Look in your mobo manual.

Thanks both for help. I kinda don't have my mobo manual anymore ;P

 

[wt123]

I have a FOXCONN MCP73, and I can't find manuals for it online :S!

 

[thingemajib]

Remove the battery on the Motherboard

+1

 

[wt123]

+1

I took the little battery out put it back in and its still doing the same thing

 

[wt123]

Anymore help please

 

[whitecrook]

unplug the power and the battery

 

[wt123]

Fixed !

 

[Uriel]

Good. What worked?

 

[shadowsnypa1]

reset cmos, remove the battery for 1 min then back in

 

[han_solo]

As above but also press and hold the power button to discharge any available power to be absolutely sure

 

[wt123]

Good. What worked?

To be quite honest, I'm not sure lol, at the bottom left of my mobo are 6 small pins (dunno what their called but you probably do), and to the left of them are 2 pins which say CLR_CMOS), so I took the PWER one and reset one I think and plugged it into CLR_CMOS, and then I plugged the PWER and reset one back to where they originally were and it worked.

 

[dragy2k]

have a look in google there are loads of old e2200 overclocking guides , if you dont know what make of mobo you have download cpu-z , it will tell you all the info you need ....then check your mobo makers website and update your bios .