• Notice regarding image hosts and attachments. See here.

Upgrade spec/info needed

Associate
Joined
17 Jan 2012
Posts
122
Hi

Newby here!!

Need to upgrade my system below are the current specs:

Case - Chant Case Ca-16m Black (Trendsonic)
CPU - Intel Core 2 Duo [email protected]
RAM - 4GB DDR2@ 332MHz
Motherboard - ASROCK G31M-S 2.0
GPU - NVIDIA 9600GT 1GB
320 FUJITSU MAXTOR hdd
PLUS 500gb SEAGATE EXTERNAL ONE

I don't need a monitor, keyboard, mouse or a OS. And i will be transferring my existing graphics card to the new build and upgrade probably around the summer.

Here's mu current basket:

Intel Core i5-2500K 3.30GHz (Sandybridge) Socket LGA1155 Processor - Retail £179.99 (£149.99)

Asrock Z68 Extreme4 Gen3 Intel Z68 (Socket 1155) DDR3 Motherboard £144.98 (£120.82)

OCZ Vertex 3 120GB 2.5" SATA-3 Solid State Hard Drive (VTX3-25SAT3-120G) £146.99 (£122.49)
Corsair Carbide 300R Mid Tower Case - Black £59.99 (£49.99)

OcUK Battle 650W Dual Rail High Efficiency Modular '80 Plus' Power Supply £50.99 (£42.49)

Kingston HyperX Genesis Grey 8GB (2x4GB) DDR3 PC3-12800C9 1600MHz Dual Channel Kit (KHX1600C9D3X2K2/8GX) £35.99 (£29.99) (16GB)


Sub Total : £545.76
Shipping cost assumes delivery to UK Mainland with:
DPD Next Day Parcel
(This can be changed during checkout) Shipping : £11.75
VAT is being charged at 20.00% VAT : ££111.50
Total : £669.01

Is this any good? and would I definitely need a new case?

thanks for your help!!

p.s. budget is around £500-£700 for general use and odd bit of gaming.
 
As above, I'd change the PSU. other than that, it looks good. Obviously you can now get much better GPUs, but if you're upgrading later than that's fine :)

Also, 16GB of RAM is unnecessary. 8GB is plenty for gaming :)
 
Why not make use of the OP's full budget?

You have given him a worse motherboard - No Gen3 or SLI/Crossfire support. It only has a HDMI output and only has 4-pin ATX power connector, so overclocks will be low.

PSU isn't exactly amazing either.
 
I've found information on the Gigabyte site about it supporting 22nm CPU's but nothing about PCI-E3.0.

It doesn't have any PCI-E switches, the top slot is directly connected to the CPU by 16X lanes.

The bottom slot is also connected directly by 4X.

Thus its PCI-E3.0 with a IB CPU
 
thanks for the recommendation guys.

must add i won't be ordering until february at the earliest but wanted to get a good idea of a reasonable spec now.

is there any reason why some of you have opted for the crucial SSD and not the vertex 3?
 
thanks for the link very interesting read.

I have heard that the crucial ssd go dead if kept powered on for a certain number of hours? has this been fixed with the latest firmware?
 
Back
Top Bottom