• Notice regarding image hosts and attachments. See here.

Upgrade

Permabanned
Joined
29 Jun 2010
Posts
1,552
Location
England
Hiya guys I'm selling my pc in sig for £400 to a friend and as my computer is slightly faulty with the occasional artefact. my computer's CPU is overclocked to 3.6ghz and 1100mhz ram, so i've set it back to default - 3.2ghz i thought the ram would go back to 1600mhz but it went back to 1333mhz will this decrease the artefacts for my friend and does 1333 and 1600mhz actually have a big difference?
 
Hello, been trying to get onto Steam, but keeps going wrong :(

Did they find anything wrong with the system you sent it away?

Anyway, as your PC is at stock you can manually adjust the memory multiplier to get 1600mhz, on certain systems there can be a difference but I suspect in real world usage he probably would not notice.
 
Oh originally it said 1600mhz but when I saved and exit from the CMOS it must've automatically changed to 1333mhz.

On the side of each memory module will show the voltage, to run at 1600mhz you probably need to increase this to around 1.60 - 1.65v. This should be under DDR 3 Voltage control in the BIOS

http://i1216.photobucket.com/albums/dd365/jsastra/IMG_03091.jpg - is the link

But will this reduce my artifacts for my friend and will having 1333 or 1600mhz on my ram make much difference.

Can't answer the first part only time will tell when he starts using the PC.
2nd Part probably not, unless he starts benchmarking and start comparing systems
 
Back
Top Bottom