• Notice regarding image hosts and attachments. See here.

USB ports on your PC

Soldato
Joined
1 Mar 2007
Posts
4,795
Location
Portsmouth
Ive noticed with my wireless adapter that if I move it to another port it wont work, now thats no a problem as Iam happy to just leave it in the port its in.

Now if I plug in my iPhone to a rear port and upload some music, and then connect it to my front ports-will it work on my front ports? Iam asking this as ive not setup my front panel ports yet, and in future will use them but for the time being will use the rear ones.
 
Yer I dont know why that is. Its only because ive been lazy and not bothered to figure out how to wire my front panel connectors yet.
 
Sometimes Windows throws a fit when you move USB stuff around, and you have to reinstall the drivers. Dunno why.

My external hard drive won't work at all with the front ports - they don't supply enough power. iPhone should be alright though.
 
Sometimes Windows throws a fit when you move USB stuff around, and you have to reinstall the drivers. Dunno why.

They may run off the same controller but Windows still treats each port as an individual interface, so there's your answer. Try looking in device manager sometime ;)
 
what should happen when you move devices around different usb ports
windows should recognise the device and auto install the drivers for it
some devices like youe Wi-Fi adapter need the drivers manually reinstalled
however once windows has had the drivers reinstalled on that port it will then auto recgonise
it each time its re plugged in to that port.
 
I find sometimes that if I move my devices onto my front USB ports from the back (or vice versa) I have to re-install the device. In device manager I have two USB controllers, one for each physical USB header on my board. If I switch my mouse, camera or pen drive between them, it makes no difference. However, if I move my keyboard, webcam or graphics tablet between them I have to re-install the driver. With my iPod, I had to install my driver twice (once for each controller).

It stands to reason that drivers that come with Windows (ones that you don't have to download or install manually) are automatically installed globally when you plug in the device, so if you move it around you don't need to install it again. This doesn't apply to my keyboard as it is a wireless keyboard/mouse combo (I don't use the mouse) with an in-built media player remote.
However, any device I had to install manually (driver download or CD) makes me re-install the driver if I move it between controllers. On the same controller I get no issue. This leads me to believe that as long as the device is on the same bus path, it'll stay installed. For example:

Standard Enhanced PCI to USB Host Controller on PCI bus 0, device 11, function 1
USB Root Hub 2 on Standard Enhanced PCI to USB Host Controller
Generic USB Hub on Port #0001 (USB Root Hub 2)
Logitech Webcam on Generic USB Hub

If I move the device around on the back ports, that path doesn't change. If I move the device onto my front ports, it is then on USB Root Hub 1, port #0001.

I may be wrong about this being the reason why it asks for a new driver (the iPod definitely breaks the rule, and my phone needs re-installing every time I change the port at all) but it seems to be that most devices follow this logic.
 
sometimes products dont work because the ports arent usb2

i have usb ports on my keyboard but my joypad wont work in them because they are not usb2
 
They should work anyway as the USB specification states that legacy devices (USB1.1) should cause the communication speed to be bought down to the slowest common level.

So, if I put a USB2.0 device on a USB1.1 hub, the device's USB controller should simply scale the communication speed down to that of USB1.1. Windows usually shows a message saying "This device can perform better if you plug it into a USB2.0 hub".

However, if the hub is really old (pre-1998) it will not support this scaling. However, very few USB devices were around back in 1996-1998 so it is unlikely that this is the problem.

The reason that your problem is unusual is that most simple devices use a USB interface chip like the MAX3420, all of which are built to the USB specifications.
More complex devices use FPGAs, which almost always have an inbuilt USB interface controller (iirc, all of the Xilinx ones do).
 
Back
Top Bottom