Associate
- Joined
- 5 Jan 2005
- Posts
- 349
- Location
- not far from OChq
Hi all
Turned my pc on this morning and was getting into a bit of f1 2020 and it just randomly turned its self off. It did this a few times, a few times in windows, once while loading windows and once in the bios.
I initially suspected the power supply (it's not the best)
Specs are:
Ryzen 5 2600x
Gigabyte Aurous b450 elite
16gb corsair lpx 3000mhz
Nvidia 1660 super
Deepcool Ganermaxx 400 cpu cooler
Antec p900 case (old but still works fine)
Kolink Modular 600w 80plus Bronze PSU
I did have the cpu vcore offset to -0.078 and pbo enabled. The ram was running 15,15,15,35 timings with gear down mode disabled to allow the odd timings. GPU is clocked at +25 on core and +800 memory.
I reset the the bios to optimzed defaults. It hasn't shutdown since. The cpu vore is now at auto and pbo renabled and ram has default timing with xmp enabled.
Temps were and still are fine doesn't go over 70c when stress testing and vrms average at 60c. Tbf they have increased by 10c but I'm putting that down to setting vcore to auto.
I haven't had chance to do anymore testing before work so will be doing some more tonight.
As I said I do suspect the psu but with vcore on auto it should be drawing more power but hasn't restarted since.
Just wondering if anyone has any suggestions before I start rma on psu (only part still with warranty luckily)
Thanks for your help
Turned my pc on this morning and was getting into a bit of f1 2020 and it just randomly turned its self off. It did this a few times, a few times in windows, once while loading windows and once in the bios.
I initially suspected the power supply (it's not the best)
Specs are:
Ryzen 5 2600x
Gigabyte Aurous b450 elite
16gb corsair lpx 3000mhz
Nvidia 1660 super
Deepcool Ganermaxx 400 cpu cooler
Antec p900 case (old but still works fine)
Kolink Modular 600w 80plus Bronze PSU
I did have the cpu vcore offset to -0.078 and pbo enabled. The ram was running 15,15,15,35 timings with gear down mode disabled to allow the odd timings. GPU is clocked at +25 on core and +800 memory.
I reset the the bios to optimzed defaults. It hasn't shutdown since. The cpu vore is now at auto and pbo renabled and ram has default timing with xmp enabled.
Temps were and still are fine doesn't go over 70c when stress testing and vrms average at 60c. Tbf they have increased by 10c but I'm putting that down to setting vcore to auto.
I haven't had chance to do anymore testing before work so will be doing some more tonight.
As I said I do suspect the psu but with vcore on auto it should be drawing more power but hasn't restarted since.
Just wondering if anyone has any suggestions before I start rma on psu (only part still with warranty luckily)
Thanks for your help