• Notice regarding image hosts and attachments. See here.

what psu for full tower

Associate
Joined
3 Sep 2008
Posts
4
Hi, i'm building a system, using:-
Thermaltake VD4000SWA LCS Aluminium Kandalf Full Tower
Gigabyte GA-EP35C-DS3R Intel P35 (Socket 775) PCI-Express DDR3 Motherboard
Intel Core 2 Quad Pro Q6600 "Energy Efficient SLACR 95W Edition" 2.40GHz (1066FSB)
TWIN2X4096-6400C5DHX DDR2-800 (DHX2-6400C5*4GB)
Graphics card to be decided later
HDD to be decided later

my question is this, what is the best modular PSU to get under £100 taking into concideration its a full tower, will the power leads be long enough etc?

Paul F
 
firstly you are getting DDR2 RAM with a DDR3 Motherboard, these are physically not compatable.

with regards to the power leads length, are you going to be routing your cables to make your pc look neat inside or will you just be going for the shortest route?

what is the pc used for?

your graphics card will most likely help determine the PSU you need
 
Last edited:
The motherboard can use both ddr2 and ddr3,

i would like to route the cables so it does look nice and neat,

the pc would be used for gaming mainly and digital photography work

The graphics card would probably be Nvidia, not bothered about SLI or Crossfire and would probably be a card at around £100-150
The psu i had in mind was the thermaltake toughpower 750W but the availabilty isnt very good at the moment
 
The enermax that Grimley suggest, or the Corsair would be fine. Also take a look at the Seasonic range.

As an aside, I'd go for a 4850 in that price range, or if you can stretch to it a 4870 would be better. The current crop of ATI cards are far better value in this price range.
 
That case isn't very high so most PSUs have long enough cables without "pulling them straight and some more".

not bothered about SLI or Crossfire
good 500W would be well enough. (4870X2 is CF in one card)

So Corsair HX, Enermax Modu or Seasonic M12 around that 500W is good choise and also stays efficient during idling/light use.
ToughPowers are good quality performers but CWT isn't exactly known from quiet PSUs so that's why I'm leaning towards those three series. (well... two designs)
 
I would go with a Tagan piperock series, i use tagans in all the builds i do,must have fitted 70-80 of them and never had problems with one.
 
I would go with a Tagan piperock series, i use tagans in all the builds i do,must have fitted 70-80 of them and never had problems with one.

Disagree. I can't argue against your personal experience however if you google the Tagan piperock psus you find out the following:

1.Videos on yutube with the piperock psus whistling when under load - common fault apparantly
2.Major us etailer with lots of people on the review section complaining about their Tagans failing in the first year.
3. The fact that although Tagan offer a three year warranty it is now ony one year parts and labour and years two and three are parts only. This is pretty pathetic for a high end psu when other manufacturers offer full 3 or 5 year warranties.

For those reasons, I decided not to buy the Tagn piperock although I was very close to doing so.
 
Back
Top Bottom