What temp am I ment to be looking at?

[Liam123]

Im wanting to overclock my 1090t on my new board but I havnt got a clue what I should look at to know the temp see pic

Im not sure what to look at, and the strange thing is the temp on the left gets to around 59degrees under load even on stock clocks, is this a misread

 

[j.col]

Im wanting to overclock my 1090t on my new board but I havnt got a clue what I should look at to know the temp see pic

Im not sure what to look at, and the strange thing is the temp on the left gets to around 59degrees under load even on stock clocks, is this a misread

this is very high for your cpu, you should be looking at 55 as a safe max temp.
i also use coretemp, so i do trust it, but try downloading realtemp, do the temps match?

what cooler have you got?
as its a new board, try remounting the cooler, as you remove it, have a look at the old paste spread, this is a good indicator if you applied it properly.

personally i would do a remount, as those temps are very high for a stock 1090t.

 

[Liam123]

I'm running a freezer 7 pro with artic silver ceramique 2 I did have a few problems mounting and I wasn't too sure about how to apply I went with the pea method with pressure' my idle temps are good but the load is bad, b4 when I was using the pre applied compound it still reached 60 I'm not sure what temp it's reading it may be the northbridge either way I need to upgrade my cooling

 

[Liam123]

I think I've solved it, on these asrock extreme 800 boards they have problems with temps I just noticed in the bios it said my CPU was 50 at stock and under stress asrock says 60+ even though the system seems fine but it turns out these readings are wrong and I should focus on the core temps hopefully fix this in later updates