• Notice regarding image hosts and attachments. See here.

What's wrong with my pc?

Associate
Joined
6 Jan 2011
Posts
29
Hello all!

Last night my started behaving very strangely, it displayed a message saying the graphics driver had stopped working, and then it recovered and was fine.

Opened Firefox and got some discoloration on the screen and some screen freezing. At this point I realized something was wrong so dropped the core and the memory right down (below stock) on the graphics card. This didn't make any difference and things kept getting worse.

The spec of the machine is as follows:

Gigabyte GA-P35C-DS3R
4gb Geil DDR3 1600MHz
Q6600 3.56 GHz
TRUE
HD4850 512mb / Scythe Mushi cooler (was running at 780 MHz core / 1200 MHz ram)
Corsair HX620
2 x Vertex 30GB SSD's RAID 0

Never had any problems before and this machine has been running with the above overclocks totally stable (stress tested CPU and graphics) for ages.

Please see the following YouTube link (very shaky, taken on phone) showing the screen from start up.


Any ideas what's wrong?

(The monitors fine....using it now plugged into the laptop)

Thanks for your help,

Ben :D
 
Looks like Graphics card is dying on you. Especially if you get it as soon as you turn on the PC. Try reseating the card and cable etc.
 
I was going to say driver problems till i saw the vid! The gpu is flaky before you even get into windows :(

You could try "baking/reflowing" the card if you are tight on cash. A GPU upgrade would be my suggestion though
 
I would say its gpu also, i had this other year on this pc "it displayed a message saying the graphics driver had stopped working, and then it recovered and was fine"
Then some days or so later i was playing WOW and i was getting a lot of odd graphics, i could see it was about to crash, so i exit wow fast and shut down pc got myself a new ATI stuck it in and its been ok since.
 
Super! I'll give that a go..... nothing to lose really! Thanks

No worries fella! Fingers crossed and all that :)

That's probably not the best vid on the subject. I suggest you do a lil homework first.

It's important not to move it and let it cool for a good 15-20 mins, so the solder can "set". I like to work a lil flux underneath before I do the reflowing but you probably don't have any to hand......it's not essential i just like to bodge things properly ;)
 
ram needs a certain voltage to work, you shouldnt underclock it - just put it all to stock.

if your gpu has this problem with stock speeds, is dead vram. new card required.
 
Give it a shot in the oven. I had an old nvidia 7900 that started playing up so took it out and baked it. it was/is still fine. (although moved on to a 6950 now) ;) it will work if you do it right.
 
Back
Top Bottom