Which network cable.
- Thread starter andicole0
- Start date
Associate
- Joined
- 4 Jun 2021
- Posts
- 487
- Location
- Yorkshire
No need, Cat6 can support speeds well in excess of 900Mbps.
Soldato
- Joined
- 20 Oct 2008
- Posts
- 12,082
Cat6 UTP will be fine.
Cat5e would probably also be okay. Depends how likely you are to want 10GBe. Cat6 is a safer bet for that.
Cat5e would probably also be okay. Depends how likely you are to want 10GBe. Cat6 is a safer bet for that.
Soldato
- Joined
- 20 Oct 2008
- Posts
- 12,082
Cost and a more difficult install. You don’t need it.
Soldato
- Joined
- 20 Oct 2008
- Posts
- 12,082
Good that that flat cable is working for you, but they’re best avoided if you can.
Why would you recommend flat cable unless op states it's part of the requirement, eg to run under carpet etc? Also, if you do suggest something that's not ideal, you at least take the time to explain why it's not recommended. Over a short distance like 10m it's less likely to cause issues, but it shouldn't be anyones default suggestion.
Op, realistically 5e or better is more than adequate, i've personally run 10Gb over 5e without issue, 6 and 6a just make it more likely to run further, but unless you have the kind of house with a servants wing or are trying to gift wrap it in network cable, it's unlikely to be a problem.
Upgrading past CAT5e for a 900Mb FTTP connection is pointless really, it's not going to be changing your LAN connection speeds unless you are upgrading to multi-gig hardware, even then CAT5e can do 10G over approximately 45m distance which I doubt many home users will be going over.
No choice for me, I had to use a flat cable to run under a door with just mm clearance.
Although it is cheap kenable list it as cat 6.
It will achieve Cat6 speeds, but its not Cat6 UTP specification.