• Notice regarding image hosts and attachments. See here.

Why do people seriously do this?

Been past a few times

Can’t recall if I drove through or went another way. Definitely no flooding as usually **** myself when seeing floods and go another way instead of risking it

One time I took a detour but my cousin in his TT didn’t and got his floor soaked
 
Last edited:
What's the safe depth for driving through a ford (slowly and properly, creating a bow wave) in the average modern car?
 
Last edited:
Whats this 'creating a bow' wave myth come from?

Submerging the nose and intake is the last thing you want, Its only really my Defender i can think where its value as the intake ducts are on the wings / Wing for the diesel with a single intake
 
Last edited:
There have been a few model 3s going through it and they are fine. Well the number plate can be blasted off with enough speed.

Still you wouldn't want the water up to the base of the windscreen as the air con intake is near there, can't be a good thing for passengers.

The door seals are robust and there are various videos on the internet of Teslas doing fine in crazy deep water.

No idea why people are blasting through it anyhow, but the videos provided a little entertainment.
I am sure I read that Tesla's can float and don't they have a positive pressure mode in the cabin :confused:
 
Last edited:
Whats this 'creating a bow' wave myth come from?
I'm not sure it's actually a myth - by creating a wave, you artificially move the water forward, lowering the part directly behind the wave, therefore reducing the depth going over the bonnet/engine/air intakes etc, allowing you to ford a deeper amount of water.

e.g. diagram 3 here:
 
But surely the nose/grill of the car has to be in the water in order to create that wave, and for the vast majority of cars, that's exactly where the intake is - just behind the grill or front bumper. Sounds like something which applies only to vehicles with side intakes (ie, previously mentioned Defender), but someone at some point has assumed it applies to all cars, so now we have people accelerating through fords thinking their intakes will be dry :p

Pretty sure the best* option for most cars is just check that the water level is lower than your intake, and then crawl through so it wont be pushed up over that level.

*Assuming there's no detour of course.
 
Last edited:
But surely the nose/grill of the car has to be in the water in order to create that wave, and for the vast majority of cars, that's exactly where the intake is - just behind the grill or front bumper. Sounds like something which applies only to vehicles with side intakes (ie, previously mentioned Defender), but someone at some point has assumed it applies to all cars, so now we have people accelerating through fords thinking their intakes will be dry :p

Pretty sure the best* option for most cars is just check that the water level is lower than your intake, and then crawl through so it wont be pushed up over that level.

*Assuming there's no detour of course.

Not a guarantee of success, because things like holes low down in the firewall and the cars electrics will get you even if no water enters your intake.
 
It is captivating! I can't believe the cost and each of those cars are knackered. I wouldn't entertain the idea of going through that depth of water!

Always thought its best to keep a steady slow pace to keep bow wave down to a minimum.

Is there no plans to build a bridge or warning signs to close off the road?
 
There's one where a guy absolutely guns it and instead of going straight ahead ends up going to the right up the river.
 
But surely the nose/grill of the car has to be in the water in order to create that wave, and for the vast majority of cars, that's exactly where the intake is - just behind the grill or front bumper. Sounds like something which applies only to vehicles with side intakes (ie, previously mentioned Defender), but someone at some point has assumed it applies to all cars, so now we have people accelerating through fords thinking their intakes will be dry :p

Pretty sure the best* option for most cars is just check that the water level is lower than your intake, and then crawl through so it wont be pushed up over that level.

*Assuming there's no detour of course.
Exhaust fills up with water. You need to keep the revs up.

(Or just drive the long way round !)
 
I'd guess less than half a foot.

My unscientific testing (driving loads of crappy rental cars in terrible conditions) leads me to believe that the average car can go through quite a lot more than that with a competent driver. Anything remotely sporty/premium often has the air intake mounted very low, but mundane stuff seems to manage quite a lot better, as you can see in a lot of the videos. Whether or not it does any long term damage though I couldn't say - I certainly wouldn't try it with my own car.

My wife once drove a Dodge Caliber through very deep water, fast enough to rip part of the exhaust off and remove various plastic bits from underneath. I pulled it out with my truck, let it dry out and it didn't seem to affect it at all. She has a lifted Jeep now which should hopefully prevent anything similar from occurring.
 
Ive driven through Rufford ford loads of times but as soon as there has been a spell of rain I avoid it. There is a clear depth gauge but I guess people don't understand what that means to them.

The detour around it is barely ten minutes.

Oh and I also saw a huge monster trucked land cruiser go through at full speed, he torque steered on exit and ran his huge tyres down the side of an oncoming white BMW 1 series. Quite amusing.
 
Last edited:
What's the safe depth for driving through a ford (slowly and properly, creating a bow wave) in the average modern car?

Depends vastly from car to car but most should be OK up to about 6 inches. Some are surprisingly badly designed for it while others surprisingly good. (Look up wading depth for any given model).
 
Last edited:
  • Like
Reactions: mjt
The two truckers were particularly dumb, the tanker driver clearly didn’t appreciate his air intake is the small grill to the side of the Scania badge, which is a few feet above the ground and which was submerged by his rather ludicrous bow wave he created by hitting the water so fast….

I’ve had water come into my cab through a dodgy door seal before now which left a puddle in my footwell as I was travelling through a very swollen deep Ford, the difference being I went at a walking pace which kept my air intake clear of the water.

I’m not particularly surprised by the car drivers, most of whom have no clue how an engine actually works, but a supposed professional driver should know better….
 
From watching the videos, you know straight away which ones are going to get hydro locked.

Focus Mk3 - if the water hits the top of that grill, it's gone - every time.
Fiesta of same era, same.

BMW 116/8 & C Class - if it touches even the grill - it's dead. They must have very low cold air intakes. Plus they're appear to be driven by people completely oblivious to the mechanics of their car.
 
Back
Top Bottom