Windows 7 won't boot past "Starting Windows" screen? new build

[truewraith]

hi,

was building a comp for my kids and all was fine for a week till yesterday when the comp just froze and now i cant get back into the comp not even in safe mode it just loops back to reboot. when i press start as normal or even last known config it gets to the starting windows with no moving graphics logo either and just reboots auto and sometimes before the reboot i see a super fast BSOD. Anyone that cam help me on this would be a life saver please?

Also tried another ssd driver and tried to instal windows but progress bar stopped just after the text loading on the loading windows files and rebooted again

This is the setup

Corsair CMK8GX4M1A2400C16 Vengeance LPX 8 GB (1 x 8 GB) DDR4 2400 MHz C16 XMP 2.0
Aerocool Integrator 600W Power Supply, 80 Plus Bronze, Up To 85% Efficiency,
MSI B450 TOMAHAWK Socket AM4 ATX
AMD Ryzen 5 2600 Processor with Wraith Stealth Cooler - YD2600BBAFBOX
SAPPHIRE Radeon RX 580 NITRO+ 4 GB GDDR5 2xDP/2xHDMI/DVI-D
SanDisk SSD PLUS 240 GB Sata III 2.5 Inch Internal SSD, Upto 530 MB/s

thanks to anyone that can help

 

[truewraith]

hope i didnt post it in the wrong section

 

[truewraith]

i tried everything i could think of and also tried the memory all slots inc the slot dim 2 which was recommended and still same thing i set to defaults and cleared cmos.

 

[truewraith]

i bought everything as always from ocuk but the memory i bought from amzon. i bought 1 8gb for me and 1 for my brother so i borrowed is today and put it in the comp and boom it works no problem. i never suspected the ram because i have never had any ram go faulty

want to thank you all for the help and advice you gave me. i will hope to send it back and hopefully find any alt on ocuk to buy as i should have done. just hope the other ram stick doesnt end up as bad...

 

[truewraith]

https://www.overclockers.co.uk/team...al-channel-kit-grey-tlgd416g24-my-088-tg.html

this is good memory to buy isnt it still ?