Woohoo, loving my Opteron 146 :D :D

[Dutch Guy]

Increase the CPU/VDimm voltage slightly and try again at 2.9Ghz

 

[CodeThief]

Increase the CPU/VDimm voltage slightly and try again at 2.9Ghz

I'd love to but I've already modded my ASRock board to get 1.55v, that's the most I can get out of this board There's also only the option to go to 2.7v on the VDimm

Looks like I need a better mobo to clock higher. Oh well, I'll wait for my 6800 to die so I have an excuse to get a PCI-e card and a DFI board

Dave

 

[Dutch Guy]

Ah, did not check what mobo you have.

What you can do is slacken the memory timings to see if that gives you stability at 2.9Ghz but that will only work if the memory is the limiting factor.

You could also be limited by the mobo though or the CPU.

 

[CodeThief]

Ah, did not check what mobo you have.

What you can do is slacken the memory timings to see if that gives you stability at 2.9Ghz but that will only work if the memory is the limiting factor.

You could also be limited by the mobo though or the CPU.

Well the memory is only running at 200Mhz anyhow at 2800Mhz (CPU/14(DDR150/300)) so I don't think it's that. I suspect it may be a board.

Dave