X800 & 3Dmark06

[wannabedamned]

My graphics card is an ATI Radeon X800GTO 512MB Sapphire PCIE Card
I have 2gb G.skill DDR500 with 3 4 4 8 timings
My CPU is running at 2.9ghz stable

My Graphics card is at stock core and mem speeds. So 400 on each.

Now my 3Dmark06 score is 1656

Thats SM2.0 - 823
SM3.0 - N/A (for obvious reasons)
CPU Score - 1132


Does that sound right to people?

I averaged about 5fps on the 1st test Return to Proxycon

I average about 8fps on the firefly forest one.

On the CPU tests I averaged around 0.3 - 0.5 between both tests


--

lol, so lame in comparison to new cards

I know not to expect scores of 16, 000 don't worry, But i thought i'd be getting atleast closer to 2500 ish

 

[james.miller]

no sm3.0 support in the x800 series mate, that why the score is low. its about right

 

[wannabedamned]

no sm3.0 support in the x800 series mate, that why the score is low. its about right

Bah! I figured as much

Well, I'm going to get rid of the omega drivers and stick on the official catalyst drivers, and see if that changes it slightly, Even if only to squeeze out 1 or 2 fps

And then i'll play at overclocking *rubs hands* But i have to be careful as it's stock cooler

 

[MadMatty]

I dont know how well the gto compares with the xt, but heres my 3dmark to compare. 2289 before I swapped the x800 for the x1950pro.

http://service.futuremark.com/compare?3dm06=600425

 

[wannabedamned]

rawr! My card overclocks NO WHERE. 400 to 410, I Run a check for artifacts and screen goes blank and the catalyst control centre resets my card due to it not responding! Bah, R430 core

Thats poop!

 

[cokecan]

Apparantly i got 2024 points when i ran 06 with my x800pro accordin to the 3dmark06 thread, could have sworn it was 1000 somethin lol

score: 2024
SM2.0: 1084
CPU: 791

rig:
3400 clawhammer
1gb Gksill LE (2,2,2,5 1T)
X800pro @ X800XT PE

have since upgraded the mem and had to go back to a 9800XT to get dvi workin with my pj

what heatsink have you got on your card?

 

[sargatanas]

rawr! My card overclocks NO WHERE. 400 to 410, I Run a check for artifacts and screen goes blank and the catalyst control centre resets my card due to it not responding! Bah, R430 core

Thats poop!

I'm in the same boat, my XT PE goes nowhere really. Even with a Zalman VF700 on it, and idle temps of 30C, load of about 45C, i still cant really go above 560Mhz.

 

[Antx777]

I get about 2,300 on my X850XT (FX-55)

Like a slide show on valium aint it ...



-Ant

 

[MadMatty]

amazing though that each driver update pushes the x800 line just a little further after all this time..