• Notice regarding image hosts and attachments. See here.

XBox 360 VGA Cable + KVM Switch

Associate
Joined
8 Apr 2004
Posts
2,053
Hi, I'm thinking of getting a KVM switch so that I can use my TFT with my PC and 360 without having to switch cables but I have a question that I haven't been able to have answered. If the end of the VGA cable and the end of the KVM cable that you should plug your console into have the exact same end (which looks like this one: http://img142.imageshack.us/my.php?image=vgacon9vm.jpg) then do I need a convertor or something? I'm not 100% sure that is the correct KVM cable end (no idea which is male or female!) as it's been years since I last used one but having checked the VGA slot on my graphics card, I'm pretty sure the KVM cable end would be the above.

When I first got the VGA cable, I was baffled how I would connect it to the monitor VGA cable as they had the same ends (as above) until I realised I could just plug it directly into the monitor itself. But now I'm wondering the above. Would I need a convertor to connect both ends, or does this depend on the KVM switch I'm getting? Hope I made sense. Regards
 
Last edited:
Im fed up switching plugs and Im just about to do the same thing, ive been looking at kvm switches and you would need one that doesnt have the leads already built in and attatched if you want to use the 360 with it, eg like the dl-ink one here on OCUK, you just plug your 360 vga in to the kvm aswell as your pc vga lead which goes to your monitor normally, then you need to buy another vga cable which goes from the kvm switch to the monitor/tv you want to use, also I dont really know if an auto or manual is best,, Ive heard the d-link one works excellent though with no loss of quality that you may get from chepo's im just hoping to find a second hand one as £50 is a little steep imo,,
 
turtle3 said:
Im fed up switching plugs and Im just about to do the same thing, ive been looking at kvm switches and you would need one that doesnt have the leads already built in and attatched if you want to use the 360 with it, eg like the dl-ink one here on OCUK, you just plug your 360 vga in to the kvm aswell as your pc vga lead which goes to your monitor normally, then you need to buy another vga cable which goes from the kvm switch to the monitor/tv you want to use, also I dont really know if an auto or manual is best,, Ive heard the d-link one works excellent though with no loss of quality that you may get from chepo's im just hoping to find a second hand one as £50 is a little steep imo,,

I paid £50 as I won't touch Belkin stuff, worth every penny.
 
I've got a cheap (£17 iirc) Belkin KVM with a gender changer on the 360 lead. Its designed to be used with USB keyboards etc so it quite hapily takes its power from the 360's rear USB port.

It isn't perfect by any means and often freezes meaning I have to pull out both USB's so that it loses power and resets but it is 100 times better than pulling my TV forward and reaching round the back whilst trying not to bin the whole lot on the floor :o

Previously I had a switching box from the highstreet electronics place and that was BAAAD my pc looked horrible and my 360 just showed up as out of range. There is no quality loss with the Belkin though.
 
Does your TFT only have 1 input? VGA?

If it has DVI it would be cheaper to get a VGA>DVI dongle and just switch via the monitor?

If not then yea KVM Switch :)
 
Back
Top Bottom