• Notice regarding image hosts and attachments. See here.

Xbox as a PC case

Soldato
Joined
7 Mar 2011
Posts
6,859
Location
Oldham, Lancashire
As title really. Just replaced my 360 elite with a newer slim since the HDMI port was getting flakey.

How easy/difficult would it be to get PC hardware in there? Nothing overly fancy, could just be a cool HTPC case. Bonus points if I can get it to be near silent.
 
Got one, use it for XBMC on my TV. But I would like a windows OS so I can get netflix hasslefree.
 
Have never seen the inside of an Xbox360 being honest but from the look of the outside, if you stripped it down to the bare casing and use a mITX mobo with a A10 it would be pretty plausible.

The only problems would be getting all the connections, you would need to cut a hole in the back for the I/O panel and then reroute the USBs for the front, would be pretty simple, basic wiring.
 
I am going to open her up later, once I have copied over my game saves (better to just stick them on the cloud? I dunno).
I am only going to be chucking it anyway, no harm in a little anatomy experiment.
 
personally i think its a logistical nightmare to even try it, would need the psu outside the case for a start, so wires would be everywhere
 
personally i think its a logistical nightmare to even try it, would need the psu outside the case for a start, so wires would be everywhere

unless you use the external brick style PSU that some HTPC cases already use.

Althou they wont have enough power to run a high end GPU or anything
 
unless you use the external brick style PSU that some HTPC cases already use.

Althou they wont have enough power to run a high end GPU or anything

that shud be fine you wouldnt be able to fit a full size g-card in there,

only problem i see is to do with the powerbutton otherwise it shud be fine
 
Wouldn't need to be a high end GPU. Netflix, freeview and DVDs would be the limit of its use really.
 
that shud be fine you wouldnt be able to fit a full size g-card in there,

only problem i see is to do with the powerbutton otherwise it shud be fine

The powerbutton shouldn't be a problem. It works like any other PSU. You basically have a small picoPSU inside the case which plugs into the motherboard and has the sata/molex connectors and an external connector which you plug the brick into.

They are also silent which is an advantage for a HTPC.

They arn't exactly cheap thou, but shouldn't cost much more than a decent PSU
 
How about putting a laptop/netbook motherboard in, loads of space then.

Anything that isn't ancient will use sata so you could fit a 3.5" HDD, wouldn't be hard to get a regular DVD drive in.

You've got me thinking now, I have a couple of deceased 360s might have to have a quick play around!
 
Isn't the xbox's DVD drive a standard interface?

I'm not too sure, I'm sure I read something about using I think it was the samsung drives in a PC, the power for them isn't a sata power cable though and the eject button isn't part of the drive, I think it's on the power connection, so you'd need to mount a button and wire it up.
 
Back
Top Bottom