Associate
Add a 240 Monsta in front and it will fill any space left there 
XSPC H2 TITAN TRI-SLI GOODNESS
- Thread starter whyscotty
- Start date
Add a 240 Monsta in front and it will fill any space left there
Pointless - would lose all the airflow.
Got a little more done
Excuse photo's - crap phone camera
Associate
- Joined
- 8 Jan 2012
- Posts
- 668
Amazing how quickly that space is filled. Looking good like your res choice
Soldato
- Joined
- 14 Feb 2011
- Posts
- 7,490
Tubing looks alright. Need a good side pic of the whole thing to get the gist of it.
Soldato
- Joined
- 14 Feb 2011
- Posts
- 7,490
That's better, can get a feel for it now. Is that where the pumps are staying or going somewhere else?
Soldato
Love it. A lil' bit jealous of that! 
The tubing really suits the build.
The tubing really suits the build.
Soldato
Still think you need too push those res over to the right and have the pumps with 90's on runninig parallel into cpu/gpu, but thats just me
Looking very nice though neil.
I thought it was but not now it's done
Love it. A lil' bit jealous of that!
Thanks
Still think you need too push those res over to the right and have the pumps with 90's on runninig parallel into cpu/gpu, but thats just me
Looking very nice though neil.
Cheers Nick
Maybe I'm having a blonde moment but what you mean with the pumps?
Any chance of one of your Photoshop mock ups?
Soldato
Look at post 353, remember the brown boxes are your pumps!!!
I would check but i don't think that the outlet of the top necessarily needs to be at the top! Could be on its side directly facing (horizontal) to your gpu/cpu inlet.
Obviously you would need to make a bracket, but this could be done easily with some black plexi which ocuk sell, and use a piece of dense foam(camping mat) to decouple from case.
Not on pc so can't do you a mock up!!
I would check but i don't think that the outlet of the top necessarily needs to be at the top! Could be on its side directly facing (horizontal) to your gpu/cpu inlet.
Obviously you would need to make a bracket, but this could be done easily with some black plexi which ocuk sell, and use a piece of dense foam(camping mat) to decouple from case.
Not on pc so can't do you a mock up!!
Last edited:
Associate
- Joined
- 8 Jan 2012
- Posts
- 668
If what I think Nick is meaning is correct will look sweet as can be. This build really makes me jealous 
Soldato
Mailed you a rough pic off ipad! May need to rotate, tops would need to be offset so 1 would be about 25mm in front of the other so both inlet ports would be vertical going down and looping into res outlets.
Top fronts would be facing the window.
Top fronts would be facing the window.
Last edited:
I thought it was but not now it's done
I had a lot of that lol
but its all looking slick at the mo
, was only going to mention the pump position moved mine 3 times before i was eventually happy with its position
Soldato
best i can do for now, but you should get what i mean now, could either use 2 different lengths of bracket for pumps or keep them the same and just get a few straight connectors to bring the tube in front of the other to give the appearance of 1.
Would need to make some L shaped brackets, plexi would do
And the pumps go behind the tops.
Would need to make some L shaped brackets, plexi would do
And the pumps go behind the tops.
Last edited:
Soldato
I looked at that photoshop at first, and was quite worried That would look pretty decent like that.
That would look pretty decent like that.
Associate
You've probably answered that before but where did you find the GTs?