Loop upgrade - Fluid choice recommendations

Soldato
Joined
26 Aug 2010
Posts
3,142
Halfords Battery water lol, me and a few others on here use it and never had any issues. About £5 for a 5 litre bottle, i've been using this stuff for around 8 years now.
Ive used asda water and biocide for about 15 years. Never had a issue. Anything else is snake oil imo
 
Soldato
Joined
22 May 2010
Posts
11,995
Location
Minibotpc
Do you add any biocide?
I used to do this with my very first build over 12 years ago. But changed to X1 clear as it was relatively cheap back then. I can see it has gone up since.
This thread reminds me that I need to check/clean my loop which is about 2 years running with X1 clear with only a small top up.

Nope, no biocide. I clean my loop with a blitz kit, run it through with deionised water and flush it out then top again with deionised water. Have used Halfords stuff for 10+ years now at this point and it's never let me down, no corrosion, no flaking of plating etc.
 
Associate
Joined
13 Jun 2007
Posts
1,064
Location
Dorset
Do you add any biocide?
I used to do this with my very first build over 12 years ago. But changed to X1 clear as it was relatively cheap back then. I can see it has gone up since.
This thread reminds me that I need to check/clean my loop which is about 2 years running with X1 clear with only a small top up.

Ya I use a few drops of biocide..

.
 
Associate
Joined
15 Mar 2006
Posts
883
Location
Hastings East Sussex
Do you add any biocide?
I used to do this with my very first build over 12 years ago. But changed to X1 clear as it was relatively cheap back then. I can see it has gone up since.
This thread reminds me that I need to check/clean my loop which is about 2 years running with X1 clear with only a small top up.
hi mate, yes a couple of drops
 
Soldato
Joined
26 Sep 2010
Posts
7,166
Location
Stoke-on-Trent
I wanted an orange, and the mayhems just didn't look like the right shade, so used yellow cryofluid, with a few drops of red dye until I got the shade I wanted.
Mayhems non-stain dyes are designed to be mixed and matched. Easy enough to whip up the exact orange you want. I'd be sceptical about adding dyes to Cryofuel after the fact.
 
Soldato
Joined
28 Jun 2013
Posts
3,770
I just use the EK premix blood red ( not the solid color version ) Im happy with it and it was on sale for a couple of quid off per bottle last time I bought a couple of litres
 
Last edited:
Back
Top Bottom