The Fury(X) Fiji Owners Thread

Silent_Scone · 30 Jun 2015 at 22:53

It's quiet enough, some people would find my TITAN X Tri SLI build intrusive with the 1080mm rad. I guess it's personal pref, as I find the rush of air non intrusive as it's deep and dull. Where as this pump however mild is ear piercing lol.

Honestly though, when the acrylic roof is on this Lian Li it's barely heard

Edit: hard to tell on microphone but mine doesn't sound anywhere near that bad.

Gerard · 30 Jun 2015 at 22:58

Wonder if lowering the voltage would do anything, has an odd connector on it though. PLus how much do you lower it before the pump just lets the gpu cook?

And still nothing from ocuk or the amd reps on this

Even through twitter roy taylor is saying FA. Apparently burying their heads in the sand is the best thing to do at this point.

Orangey · 30 Jun 2015 at 22:59

******** hard at work:

http://forums.guru3d.com/showthread.php?p=5108919#post5108919

Gerard · 30 Jun 2015 at 23:00

Orangey said:
******** hard at work:

http://forums.guru3d.com/showthread.php?p=5108919#post5108919

Ouch.

Silent_Scone · 30 Jun 2015 at 23:00

Issues. He got the arse ache over people claiming the polling tweak on NV was working as it was interrupting whatever timing issue that was present. Looks like he's back to being a delight.

muziqaz · 30 Jun 2015 at 23:10

https://flic.kr/p/vpyVQJ
https://flic.kr/p/vqrKZ8
https://flic.kr/p/vnN32G

folding@home 426k ppd cards are laughing load temps of 53C with room temp at 28C. And fans are absolutely silent spinning at 951RPM

Oh, and I received something which hopefully does not belong to any of the cards:
https://flic.kr/p/v8DHMD

it fell out of the radiator fan. I don't see anything resembling this piece on other card. And they both are chugging along nicely.

To be honest fans make a racketing whine when at max revs. But as they spin only 951RPM max at load, so they are completely silent

Gerard · 30 Jun 2015 at 23:11

muziqaz said:
https://flic.kr/p/vpyVQJ
https://flic.kr/p/vqrKZ8
https://flic.kr/p/vnN32G

folding@home 426k ppd cards are laughing load temps of 53C with room temp at 28C. And fans are absolutely silent spinning at 951RPM

Oh, and I received something which hopefully does not belong to any of the cards:
https://flic.kr/p/v8DHMD

it fell out of the radiator fan. I don't see anything resembling this piece on other card. And they both are chugging along nicely.

To be honest fans make a racketing whine when at max revs. But as they spin only 951RPM max at load, so they are completely silent

Looks like a piece of liquid tubing :eek:

Orangey · 30 Jun 2015 at 23:12

VRMS tolerate up to 150C

http://forums.anandtech.com/showthread.php?t=2437611&page=2

Orangey · 30 Jun 2015 at 23:13

Gerard said:
Looks like a piece of liquid tubing

It is probably a piece of moulding.

LoadsaMoney · 30 Jun 2015 at 23:13

Gerard said:
Looks like a piece of liquid tubing

Thinking same

Least they not making a racket

Silent_Scone · 30 Jun 2015 at 23:16

Gerard said:
Wonder if lowering the voltage would do anything, has an odd connector on it though. PLus how much do you lower it before the pump just lets the gpu cook?

And still nothing from ocuk or the amd reps on this Even through twitter roy taylor is saying FA. Apparently burying their heads in the sand is the best thing to do at this point.

My personal opinions are my own and I don't want to fuel a fire, but being frank I think AIO solutions are just diabolical anyway. Even the fitment on the Corsair units is cheap crap. Custom blocks are half as much effort. It's just hard to picture them as a viable off the shelf solution what with fitment of the radiator if you already have items in your case using mounting points.

I know Matt installed 4 in his but the system has sod all else in it, and is running the CPU of yet another off the shelf unit. Fitting units like this one you just tie your customers in to these problems.

muziqaz · 30 Jun 2015 at 23:27

LoadsaMoney said:
Thinking same

Least they not making a racket

there is no leak, so that piece is not mine. I guess down in factory there might have been an accident and unit was smashed or something, and that piece just got into my box.

And yes, fans, pump are completely silent. there is usual pump humm coming out of the cards, but you basically would need to put your ear inches away from the cards to actually hear it.

P.S. one of the cards has push pull system now, due to the front corsair case fan, which I spun around to push air same direction as fury fan

temps are absolutely fantastic

LoadsaMoney · 30 Jun 2015 at 23:29

muziqaz said:
there is no leak, so that piece is not mine. I guess down in factory there might have been an accident and unit was smashed or something, and that piece just got into my box.

And yes, fans, pump are completely silent. there is usual pump humm coming out of the cards, but you basically would need to put your ear inches away from the cards to actually hear it.

P.S. one of the cards has push pull system now, due to the front corsair case fan, which I spun around to push air same direction as fury fan

temps are absolutely fantastic

muziqaz · 30 Jun 2015 at 23:31

LoadsaMoney said:

haha, his face

Orangey · 30 Jun 2015 at 23:35

Same amount of articulation as AK Batman

BTW early Batmans had some horrific casting choices.

Loxa · 30 Jun 2015 at 23:44

Orangey said:
Same amount of articulation as AK Batman

BTW early Batmans had some horrific casting choices.

Michael Keaton will always be Batman.

Kelt · 30 Jun 2015 at 23:48

Loxa said:
Michael Keaton will always be Batman.

Don't you think George Clooney was the best?

*runs*

kazuya1337 · 30 Jun 2015 at 23:48

Loxa said:
Michael Keaton will always be Batman.

You mean Adam West?

Loxa · 30 Jun 2015 at 23:51

Kelt said:
Don't you think George Clooney was the best?

*runs*

kazuya1337 said:
You mean Adam West?

MICHEAL KEATON!?!?!?!?!!??!

I know of "Adam West" and that series but that is a little to old for me, im 28.

JediFragger · 1 Jul 2015 at 00:12

WON'T SOMEBODY THINK OF POOR VAL KILMER!!!!!!