• Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

q6600 bsod at 3.2ghz

Try it at 2.1v, this is safe enough as the ram is rated for that voltage, +1 for memtest as well.
 
+2 for memtest, i always keep an ubuntu disk handy for that :)

did you go straight from 1.25v to 1.5v for the vcore ?
if you didn't try any voltages in between try it at around 1.4v
 
it runs fine at 3ghz,cpu v at 1.25v so i dont think the memory is at fault.
what should the cpu volts be at,should i try1.375v or 1.5v
 
i can only set it either 1.25 or 1.375 or 1.50v
im just trying 1.375v

9x356
ram at 736ghz on auto
ram at 2v
 
set AI overclocking to manual and all the voltage settings should appear :)

you should be able to go from 1.1v to 1.7v in 0.0125v increments
 
bcham said:
i can only set it either 1.25 or 1.375 or 1.50v
im just trying 1.375v

9x356
ram at 736ghz on auto
ram at 2v
Click to expand...

just got bsod

my fsb strap to north bridge is set to auto is this ok or should i set it either 200,266,333,400,
 
bcham said:
just got bsod

my fsb strap to north bridge is set to auto is this ok or should i set it either 200,266,333,400,
Click to expand...


i think i have mine left on auto.


*edit - yup just checked my settings and its is on auto.

the only settings i have changed on mine are ai overclocking to manual, vcore to 1.2625 (1.24 after vdroop) and ram voltage to 2.3v, but that is with a q9550. a very lazy overclock i know but i reached what i wanted so easily :)
i had my q6600 on an abit ip35 pro

what bios are you running ? i'm on 1101
 
Last edited:
I personally used the 333mhz fsb-nb strap, though auto should be fine. The strap determines what memory dividers are available, i found 333 to be the most stable.
 
chipps101 said:
i think i have mine left on auto.


*edit - yup just checked my settings and its is on auto.

the only settings i have changed on mine are ai overclocking to manual, vcore to 1.2625 (1.24 after vdroop) and ram voltage to 2.3v, but that is with a q9550. a very lazy overclock i know but i reached what i wanted so easily :)
i had my q6600 on an abit ip35 pro

what bios are you running ? i'm on 1101
Click to expand...

yea my bios is 1101
i still cant set my cpu volts at small steps.
 
you should be able to flash it to any bios you want to, you just need to download the bios from asus's site to a flash stick or cd then use asus ez flash in the tools menu in the bios.
 
You must log in or register to reply here.
Back
Top Bottom