** Mayhems Fine Silver Kill Coil - 99.999% Fine Silver **
- Thread starter rjk
- Start date
You got any links?
No, you don't need anything else pan
awesome, i didnt fancy spending another £18 when ive already spent £30 on the fluid
You don't need a silver coil.
Associate
- Joined
- 24 Aug 2011
- Posts
- 723
- Location
- Nr Winchester
Soldato
- Joined
- 23 Nov 2009
- Posts
- 6,038
- Location
- North Leicestershire
So mayhems ultra pure H20 and their biocide is enough ???
Soldato
- Joined
- 23 Nov 2009
- Posts
- 6,038
- Location
- North Leicestershire
1 drop of the new biocide per 1 ltr is enough. Then 1 drop ever 3 months.. 1 x 10ml bottle will last you longer than you will own your loop.
Yeah if anyone actually gets the new stuff in , still can't see it for sale anywhere yet.
i had to drain my loop 2 days ago and had to stick to the old stuff
Permabanned
- Joined
- 29 Jan 2010
- Posts
- 54
The reason is because it can take a while for the biocide to build up in the water from just coil alone,i use coil and 2 drops of nuke,been running same loop for 23 months and the water is crystal clear.
well no you dont really if you prepare the use of the silver in the water before you add it to your system.
There are sevral way of doing this.
1) is to use the silver and make a Colloidal
2) Add the silver into the liquid weeks before you use the liquid.
Number one is faster than number 2.
Silver collide is very easy to make but will take 2 silver coils to start with and a 9 Volt (square battery). Simply wire up the two silver coils one positive and one negative. Put them about 2 to 3cm apart and then leave them suspended in the water for about 1/2 hour to 1 Hour. that will put enough silver into the water. Now after that hour is over you have Colloidal silver water to start to use in you system and the two coils as well.
The best way of telling how much Colloidal silver you have though is to buy a cheap TDS meter (about £9.99) and test the water before you start then test the water after you finished.
There are many ways of making Colloidal silver using a quick goggle search. One thing to remember though once you do this the water you use becomes conductive almost immediately.
There are sevral way of doing this.
1) is to use the silver and make a Colloidal
2) Add the silver into the liquid weeks before you use the liquid.
Number one is faster than number 2.
Silver collide is very easy to make but will take 2 silver coils to start with and a 9 Volt (square battery). Simply wire up the two silver coils one positive and one negative. Put them about 2 to 3cm apart and then leave them suspended in the water for about 1/2 hour to 1 Hour. that will put enough silver into the water. Now after that hour is over you have Colloidal silver water to start to use in you system and the two coils as well.
The best way of telling how much Colloidal silver you have though is to buy a cheap TDS meter (about £9.99) and test the water before you start then test the water after you finished.
There are many ways of making Colloidal silver using a quick goggle search. One thing to remember though once you do this the water you use becomes conductive almost immediately.
Last edited:
Or one coil cut in half. Or any other two bits of pure silver.
Yeh you could do that
Yeah you mentioned this, can you link to to the forum post where they said they had problems with just one coil? As far as I see it is a matter of surface area. Who cares if it take two weeks instead of one to reach silver ion equilibrium in the solution?