Does any1 no the idle and maximum load temp of a zotac gtx560ti 448, mine is currently at 66 idle and 89-90 at load, is this normal, i was thinking of replacing the thermal paste with some mx-4 or arctic silver 5 which is best? Oh and the fan is on auto
-
Competitor rules
Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.
Zotac gtx560ti 488 temp
- Thread starter noobftw
- Start date
http://www.bit-tech.net/hardware/graphics/2011/11/29/zotac-geforce-gtx-560-ti-448-cores-review/7
Yours looks very high compared to the above link.
http://www.hardwareheaven.com/revie...rd-review-power-temps-noise-overclocking.html
Above link shows 33c and 83c for a Zotac.
http://techreport.com/articles.x/22151/8
74c load in the above link.
Yours looks very high compared to the above link.
http://www.hardwareheaven.com/revie...rd-review-power-temps-noise-overclocking.html
Above link shows 33c and 83c for a Zotac.
http://techreport.com/articles.x/22151/8
74c load in the above link.
Last edited:
Will be interested in your results, I have a 448 zotac overclocked to 800mhz (remember this is not really a 560ti but rather a 570 core with some cores disabled) I sit about 34 degrees idle and up to 80 degrees load (the witcher2) everything else between 75 and 70, but this is with a custom fan profie which is a bit noisy for my liking at 80 degrees. I am however interested in getting an aftermarket cooler as I would lke it much quieter on full load, does anyone know if the zalman will fit as no 448 boards are reference so no idea what fits.
Last edited:
Hmm what to do, i hope i dnt void my warranty if a reapply thermal paste
Slightly ambiguous wording but it would seem so:
It'll void your warranty if they can tell you've done it.
Personally I wouldn't take the chance but it's up to you.
A lot of companies don't care too much as long as you do it carefully. Try emailing Zotac first and asking if they'll let you.
If you bought it from OcUK, then i'd go for it if you're confident u know what you're doing as they don't mind as long as there's no physical damage done to the card, they'll still RMA to Zotac for you (if faulty).
PS mods:
all details have been double checked and are 100% correct as of at latest 2.5 months ago
OcUK may RMA to Zotac but the important thing is what Zotac decide when they get the card.
Not 100% sure if it applies for all manufacturers, or if 100% true, but when RMA's come from a retiler, some manufacturers are very lenient on accepting them.
Again, take with pinch of salt
fan speed
Is the fan speed ramping up correctly with temps ? You could try install something like MSi afterburner (perhaps Zotac has an equiv) and setting a profile where the fan speed increases at a lower temp ?
I got my new 570 today (while my 580 is in for repair) and it idles around 35, full load 65-68. The 560ti 448 is the same board and chip with some gubbinses disabled. Mine is however a MSi Twinfrozr iii Power Edition (factory overclocked)
My 580GTX ran 40 idle, but under full load went to 90. Granted it may have been that my fan was actually faulty from day 1.
Is the fan speed ramping up correctly with temps ? You could try install something like MSi afterburner (perhaps Zotac has an equiv) and setting a profile where the fan speed increases at a lower temp ?
I got my new 570 today (while my 580 is in for repair) and it idles around 35, full load 65-68. The 560ti 448 is the same board and chip with some gubbinses disabled. Mine is however a MSi Twinfrozr iii Power Edition (factory overclocked)
My 580GTX ran 40 idle, but under full load went to 90. Granted it may have been that my fan was actually faulty from day 1.
Not necessarily the thermal paste, it could be the cooler is just poorly fitted.
I would definitely contact support at ZOTAC and post some screenshots, ask them for assistance and advice. If they respond it could be the cooler, either get it RMA'd to them or ask them for permission to reseat the HS/FAN, make sure you get a statement that this will not void your warranty first.