fao cleeecooo or anyone else re tj07

480 in the bottom, 360 in the roof, possibly a 240 or a 280 in the drive bays? might be wrong on the last one though :)
 
480 bottom
240 bottom
240 roof (light modding)

I'd stick to 480 and 240 in the bottom. Go for EX rads and only one set of fans for each (not push pull)

The reason I say this is because you'll still get enough performance and you'll retain enough space to make cable management simple :)
 
240 rad in the front bays too if you don't want an optical drive because its not 2001 anymore.

;)
 
rjkoneill said:
240 rad in the front bays too if you don't want an optical drive because its not 2001 anymore.

;)
Click to expand...

You can still keep a DVD drive :confused:

If you keep the rad bulkhead at the bottom, it'll be avert wry tight fit and may need some light modding, but it can be done :D
 
think i will go 240 and 480 to start with. if i get a little crazy (its been known) i might get another 2 x 240 later (yes i know its not needed but if you can why not!)

might be saying bye bye to my antec 1200 in the next few days XD
 
GoogalyMoogaly said:
Now I'm wondering if this would be a better option than a TJ11.
Sounds like you can get more raddage in a TJ07?
Click to expand...

nope, TJ11 has more :)

The TJ11 is basically a big TJ07. There's a lot more space to work with. If you look at then, they are both the same case (in terms of watercooling) but the TJ11 has more potential for rads.It has more drive bays (good for storing pumps)and plenty of space at the back which you could fit a 240 to with some cutting ofc.
 
Don't want to turn this into a TJ11 thread, but can you fit a rad on the back of the TJ11 (if you do some cutting?)

I know the TJ07 requires some modding for the top rad and even then is pretty limited for thickness.

Regardless of case, how does everyone have so many drive bays free?
By the time I put my fan controller, Blu-Ray drive in, my HDDs (and SSDs depending on other mounting options) and a bay res I don't have much room for a rad in the front.
 
GoogalyMoogaly said:
Don't want to turn this into a TJ11 thread, but can you fit a rad on the back of the TJ11 (if you do some cutting?)
yes, a 240 with ease (you may need to mount it outside for conveniance.) A 360 can just fit (MUST be mounted externally)

I know the TJ07 requires some modding for the top rad and even then is pretty limited for thickness.

Regardless of case, how does everyone have so many drive bays free?
By the time I put my fan controller, Blu-Ray drive in, my HDDs (and SSDs depending on other mounting options) and a bay res I don't have much room for a rad in the front.
Click to expand...

Easy, Aquaero LT can be mounted anywhere
SSD's can be stuck to sides (who needs HDD's with the crazy SSD prices anyway:p)
Change the bay to a tube
External drive

Not saying i'd do any ogf the above, but it's possible.

zx|muppet said:
tbh a 480 and a 240 is more than enough for a cpu and tri sli / xfire! i was just thinking crazy stuff :D
Click to expand...

indeed, 720 of raddage will handle pretty much anything! :D
 
Ive got a 480 , 360 in base and 360 in the roof and a 240 on the front. not that im showing off as its a test rig and built like that for testing not for looks.
 
You must log in or register to reply here.
Back
Top Bottom