• Notice regarding image hosts and attachments. See here.

Road Cycling Essentials

Status
Not open for further replies.
Anyone tried Mavic tyres before? Thought i would have a change and give them a try. Usually use Pro 3 Race or GP4000S. Variety is the spice of life and all.

These feel almost sticky to the touch but also very tough. Not supple like the Pro3 Race. A good sign!

snc16279.jpg
 
Thanks for the suggestions guys

Might look into getting just a new frame, rear dérailleur, chain, back wheel and hanger. Problem is I dont have many tools and only really tinkered with bikes let alone building a new bike. How hard would it be and what tools/equipment would I require?

I'll keep the new bike desire on the back burner for the moment then, though was enjoying and really getting into my cycling so wouldnt have minded the extra expense to get a decent bike that should last me a while. Liked the Felt Z85 that I could pick up with a Shimano 105 groupset for £719.00.
 
The only specialist tool I think you would need is a bottom bracket tool. Almost everything else you should be able to do with set of allen keys.

I'd get a professional to fit the headset / fork and cut the steerer.
 
Thanks for the suggestions guys

Might look into getting just a new frame, rear dérailleur, chain, back wheel and hanger. Problem is I dont have many tools and only really tinkered with bikes let alone building a new bike. How hard would it be and what tools/equipment would I require?

Best bet is to find a mate with the tools and a bit of experience. There are plenty of folk around. The 'specialist' tools you'll need are for the bottom bracket, the headset (both to remove and install), the cassette and the chain.
 
You'll also need a chain whip and cassette lockring tool to swap the cassette onto the new wheel. And a chain tool as well to fit the new chain. you might not need a headset tool, depending on the type of headset.

edit: beaten :(
 
sexeh wheels dude!

out of interest whats the advantage of ridged tyres over folding?
 
Last edited:
[DOD]Asprilla;22142565 said:
New wheels collected. Wow; Vittoria Open Pave Evo CGs are not only a mouthful but also the hardest tyres I've ever fitted.

Sexeh though.

39074350.jpg

proper wheels, nice hubs, nice spokes and nice rims.
 
Whats the weight of those wheels?

698g on the front and 857 on the rear, both including rim tape, so 1,555g overall.

Slightly heavier than the claimed weights both my Racing 1-2WFs and my Reynolds Assaults but I'm not happy with the way either of those coped with the roads round there. I also think both those wheel sets are heavier then claimed, but I never actually got round to weighing them.

They are lighter than my Hope Pro3 RS Monos though.

These wheels should serve a number of purposes:

1) Be tough; roads in the surrey hills are **** and I got sick of truing my Fulcrums every week.
2) Be grippy; gravelly washout and constantly damp roads on shaded tree-lined descents make me nervous
3) Be comfortable; wide rims mean lower pressures

out of interest whats the advantage of ridged tyres over folding?

Dunno. I generally don't care whether it's rigid or folding when I order as neither will fit though my letterbox ;)

These are very definitely folding; they don't even have a shaped sidewall. They are flat like a ribbon and that's what makes them so difficult to fit. Basically they are tubular that has never been sewn up.
 
Last edited:
[DOD]Asprilla;22145619 said:
If you are following a course then I think you can add a Course Point in Training Centre.

Cheers, I'll take a look.

I had a go at the competitive cyclist bike fit calculator. I got the following measurements

Measurements
-------------------------------------------
Gender: M
Inseam: 89 cm
Trunk: 61 cm
Forearm: 37 cm
Arm: 68 cm
Thigh: 66 cm
Lower Leg: 59 cm
Sternal Notch: 155 cm
Total Body Height: 186 cm

Do these seem right and in proportion? The calculator has given me these guidelines for a fit:

The Eddy Fit
-------------------------------------------
Seat tube range c-c: 58.9 - 59.4
Seat tube range c-t: 60.6 - 61.1
Top tube length: 54.6 - 55.0
Stem Length: 10.4 - 11.0
BB-Saddle Position: 75.5 - 77.5
Saddle-Handlebar: 55.5 - 56.1
Saddle Setback: 8.4 - 8.8


The French Fit
-------------------------------------------
Seat tube range c-c: 60.6 - 61.1
Seat tube range c-t: 62.3 - 62.8
Top tube length: 55.8 - 56.2
Stem Length: 10.6 - 11.2
BB-Saddle Position: 73.8 - 75.8
Saddle-Handlebar: 57.2 - 57.8
Saddle Setback: 7.9 - 8.3

Am I reading this right as this suggests a 55-56cm frame (I have a 56cm frame at the moment) but the bike fitting I had two weeks ago suggested the frame was too small by two sizes!!
 
Seat tube c-t is traditionally what manufacturers use for frame sizing (so you're looking at a 60-62) but some do things a bit differently now - so it's best to check the geometry of the new frame first.
 
Centre of bottom bracket to top of top tube, and centre to centre of top tube. The difference is 1-2 cm (with centre to top being the larger number).

I think c-t is usually centre of bottom bracket to top of seat tube? (the bit where the seat post goes in).
c-c is correct tho, centre of bottom bracket to centre of top tube.
 
Asprilla, how much over the spec weight are your wheels? Ive got some of the rims on order attached to hope hubs. Do you suspect the rims are over spec weight? Theres not a lot written about them at the moment.
 
Asprilla, how much over the spec weight are your wheels? Ive got some of the rims on order attached to hope hubs. Do you suspect the rims are over spec weight? Theres not a lot written about them at the moment.

Few rough calcs and I don't think they are over weight at all, not on the front anyway.

24 x 6g = 144g for spokes and nipples
102g for front hub
450g for the rim

That comes to 696g, which is almost exactly what I weighed it as. I probably over estimated the spoke / nipple weight by 0.5g each but I've not accounted for rim tape weight either.

Rear should be around 150g heavier than the front (24g for four spokes / nipples and I think 120g extra for the rear hub, so that looks about right, maybe 10g over.
 
Last edited:
Status
Not open for further replies.
Back
Top Bottom