• Notice regarding image hosts and attachments. See here.

  • Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

***Official Ivybridge Overclock Thread***

are you using auto on your mobo or a tuning facility as 1.275v seems a little high for 4.3ghz try just upping the multi one at a time and try to boot in each time until it will not boot in w/o blue screening.
push a bit harder, you may have a good chip there, 65c @ 1.275v

:)
 
still by far the best stability program for my Ivy is Handbrake

if it can complete a few encodes in handbrake (so 6 hours plus) without Handbrake crashing out or any WHEA errors - then its a good sign

its the hardest program I find to get totally stable, it uses AVX I think so works the processor very hard (I get pretty high temps with it)
 
Does disabling EIST and all the works help with stability?

No real interest in running with them on but my 4.6 Ghz with 680 SLI is proving a dog to get stable. No problems running it stable around 1.28V with SLI disabled.
 
Does this seem OK temp wise?

i5-3570K @ 4.2GHz, stock volts (auto), cooler is an Arctic Cooling Freezer i30.

Ran Prime95 for 25min, Small FFTs.

iJeRV.webp
 
Im hoping i can get the temps a bit lower once i start clocking properly. The k2 is a great cooler, if a bit on the big side though.

Yep, up near the north antrim coast here.:)
 
Im hoping i can get the temps a bit lower once i start clocking properly. The k2 is a great cooler, if a bit on the big side though.

Yep, up near the north antrim coast here.:)

I'm way to lazy to do manual OC. Happy with 4.2GHz @ stock volts. Stays below 70c so I'm happy. :)

I'm using a P8Z68-V LX, so not the best for OC anyway.
 
still by far the best stability program for my Ivy is Handbrake

if it can complete a few encodes in handbrake (so 6 hours plus) without Handbrake crashing out or any WHEA errors - then its a good sign

its the hardest program I find to get totally stable, it uses AVX I think so works the processor very hard (I get pretty high temps with it)

Video encoding is indeed a very good guide to Ivy and is less synthetic than many so called stability tests but again I would do a couple of passes and just use your system. The best guide of whether its stable for your uses is simply use it!!! and forgot un-natural synthetic demands on the silicon all together.
 
Back
Top Bottom