Booting problem help

NoUserName · 15 May 2013 at 18:51

Hey all,

wanted to know if anyone could shed any light on to what this could be?

on book off my windows 7 rig it keeps locking up freezing and maxing out the cpu =/

but i do not have any programs that boot with the system apart from the ultra needed ones, i really cant see why it would need 100% cpa or to why it locks up and wont let me do anything until it crashes

at its heart is a i7-3770K so i cant see why it would need 3.50mhx to boot unless it was planning on taking off!

NoUserName

stulid · 15 May 2013 at 19:19

The CPU will run at max until it gets to the desktop then starts to slow itself down (speedstep)

As for the freezing, everything at stock? RAM set correctly (timings, speed and volts)?

squarehead94 · 15 May 2013 at 19:28

try reseating ram, as mentioned, maybe clean out your CPU cooler, BIOS reset? good luck.

wazza300 · 15 May 2013 at 19:29

32gb of Samsung green? they 8gb sticks?

you might need latest bios or beta bios for those as they improved the compatibility with that ram in recent bios's

freezing can be memory related

GA-Z77-D3H - F19h http://www.mediafire.com/?wp1pb7a7q3k413m

f19h is latest beta for that board,manually set dram voltage to 1.55v and vcore voltage response to fast and pwm phase control to extreme

that will help further with stability

NoUserName · 15 May 2013 at 20:03

stulid said:
The CPU will run at max until it gets to the desktop then starts to slow itself down (speedstep)

As for the freezing, everything at stock? RAM set correctly (timings, speed and volts)?

personal on this setup ive never seen it go above 30% i was a bit like why you so high cpu?

i think ive gt the timings right any idears on what they should be?

wazza300 said:
32gb of Samsung green? they 8gb sticks?

you might need latest bios or beta bios for those as they improved the compatibility with that ram in recent bios's

freezing can be memory related

GA-Z77-D3H - F19h http://www.mediafire.com/?wp1pb7a7q3k413m

f19h is latest beta for that board,manually set dram voltage to 1.55v and vcore voltage response to fast and pwm phase control to extreme

that will help further with stability

i will look in to this thanks =]

NoUserName · 15 May 2013 at 20:04

wazza300 said:
32gb of Samsung green? they 8gb sticks?

you might need latest bios or beta bios for those as they improved the compatibility with that ram in recent bios's

freezing can be memory related

GA-Z77-D3H - F19h http://www.mediafire.com/?wp1pb7a7q3k413m

f19h is latest beta for that board,manually set dram voltage to 1.55v and vcore voltage response to fast and pwm phase control to extreme

that will help further with stability

stulid · 15 May 2013 at 20:08

The timings are usually found on the sticks themselves.

NoUserName · 15 May 2013 at 20:32

as i thought my dram voltage is 1.50 and ram frequency is let to 1600