Soldato
- Joined
- 25 Apr 2010
- Posts
- 5,298
- Location
- Ipswich
What do you think of what I said about the dingo I'm guessing it's a voltage drop in terms of pressure on the button? I got no shorts tho :/
***The Vapers Lounge***
- Thread starter Devrij
- Start date
- Status
Soldato
- Joined
- 25 Apr 2010
- Posts
- 5,298
- Location
- Ipswich
**** SAKE THE 510 connection unscrewed off with the bloody AGA T2 and I cannot unscrew it from the AGA T2 in fear of damage the ****ing thread.
NOT EVEN IN THE GOD DAMN MOOD Ive disassembled the aga to try and get more leverage and the THING WONT COME OFF.
NOT EVEN IN THE GOD DAMN MOOD Ive disassembled the aga to try and get more leverage and the THING WONT COME OFF.
Last edited:
You fiddled with it!? 
Get in touch with Atimizoo and ask their opinion - before attempting to destroy it yourself and invalidating the warranty.
For future reference (and this goes for all devices): "only screw devices on as far as needed to make a connection - never He-Man tight." Quoted from that Vaping Expert, Captain Hindsight...
Get in touch with Atimizoo and ask their opinion - before attempting to destroy it yourself and invalidating the warranty.
For future reference (and this goes for all devices): "only screw devices on as far as needed to make a connection - never He-Man tight." Quoted from that Vaping Expert, Captain Hindsight...
Soldato
- Joined
- 25 Apr 2010
- Posts
- 5,298
- Location
- Ipswich
You fiddled with it!?
Get in touch with Atimizoo and ask their opinion - before attempting to destroy it yourself and invalidating the warranty.
For future reference (and this goes for all devices): "only screw devices on as far as needed to make a connection - never He-Man tight." Quoted from that Vaping Expert, Captain Hindsight...
Thing is I never tightened it i screwed it in only as far as the thread would allow it as they were so smooth span it round it stopped left it then i unscrewed it and the bloody 510 came out with it so i screwed that back in then unscrewed again and the aga base wont even come out of the ****ing 510 neither will the 510 connector. I did nothing to damage it even NOTHING.
I just spend 100 quid on this god damn thing and now I cant even use my AGA either.... im not even that stupid that I would screw it so tight I cant unscrew it -_-
Now im completely out of an Aga t2 and a mech mod.
Associate
- Joined
- 14 Oct 2009
- Posts
- 1,938
- Location
- Rotherham. S.Yorks
Gutted for u mate. Spray some wd40 round it and wiggle it out brute force won't work
Soldato
- Joined
- 25 Apr 2010
- Posts
- 5,298
- Location
- Ipswich
two pliers with counteracting force? May damage the surface though
Would destroy it completely.
The Wd40 is not even going to get into the threads to loosen it up.
Ive thrown it in the freezer **** it. Cant afford this bs.
Ive had the worst god damn day.
Last edited:
Soldato
- Joined
- 25 Apr 2010
- Posts
- 5,298
- Location
- Ipswich
I literally cant get leverage on the Aga base though not enough to wrap my hand around.
Wrap your thumb around it and pinch, the Marigolds will give you the grip of ten men
Last edited:
Soldato
- Joined
- 25 Apr 2010
- Posts
- 5,298
- Location
- Ipswich
I cant get the 510 connector off the bottom of the Aga T2 screw head. I freed the 510 from the Dino and put on the replacement 510 that was in the box but the Aga looks like its lost -_-
unscrew the agas centre tube first will lower the pressure inside the 510 connector
you could try freeze spray for injuries, the rapid change of temperature might crack it off - spray the aga, not the brass dingo part
you could try freeze spray for injuries, the rapid change of temperature might crack it off - spray the aga, not the brass dingo part
Last edited:
From the link:
"+1 for the freezer, works every time, never done it over night but 30 mins in the freezer has not failed me yet!!
Leave the grips and pliers as a LAST RESORT Wink
and use something in the air hole on the KFL to give a little better purchase, it doesn't need to be anything too substantial just to get better purchase "
So put it in the freezer, go load up your backup kit and clean your desk, ready for a recoiling session, vape a bit and bring your blood pressure down. Give it the 30 minutes - the Aga is Stainless Steel, just like the Kayfun, so no reason this shouldn't work.
Keep calm and methodical and know that if you really cannot get the two apart, you can contact Atimizoo - their aftercare is pretty faultless.
If you manage to separate them, before doing ANYTHING else, get a cotton bud and dip it in a small amount of Vaseline and lightly smear the threads of the 510 connections.
Then make this part of your kit maintenance schedule, along with cleaning the grot from electrical contacts with alcohol on a cotton bud.
Above all else, relax. It's not the end of the world!
Craig - before using rubber gloves, go wash your hands with washing up liquid and give the outside surface of the bits a wipe over with one of the sterettes (alcho-wipes) I sent you. This should remove any oils/grease etc that could hinder the above method. My comment about calming down is just as important - stress will make your palms sweaty and therefore slippery. A light dusting of talcum powder will help dry them.
Last edited:
Fasttech have sent my order, I imagine it'll be a couple weeks to arrive though.
I ordered all of Si's flavours to try, I'm away from home at the minute so hopefully they'll be there when I get back tomorrow. I never did receive a confirmation email as such after payment but he seems to be well known and a nice bloke so I'm sure it'll be ok.
He'll likely have sent them before you even sent the payment
- Status