***The Vapers Lounge***

Status
Not open for further replies.
Any Roses that come up for sale before the 2nd batch is out will be from speculators/flippers, wanting a hefty premium on top of RRP. They'll most likely be on the UK Vape/Trade/Auction page on Facebook, as selling gear for profit is frowned upon on UKVapers forum.

Unless someone offers it in trade for something similarly priced, I'd say wait for the 2nd batch through Vapist.net...

Loadsa time to perfect your coiling techniques :p

Well i just had a few messages from one of the guys who is manufacturing the Rose and he said that the 2nd batch probably wont be out till after xmas. I dont mind paying the £120 as that was the price they were being sold for in the first batch, anything more than that ill give it a miss. Im not that silly/stupid with my money and if i did pay over the odds then my missus will kill me lol.

Bookmarked vapist.net as i want a GP PAPS x as well and according to their stock page, they are meant to be getting some in this week coming...fingers crossed i hope.

Done a few more micro coils to test out various ohms etc and must say my coils are getting much much better now so quite happy. Almost finished my tank of raspberry so want to try out the kings custard in my KFL on a micro coil and same with the GVC.
 
whats so good about this rose for it to warrant £120? any reviews out yet?

There has been a few out but majority of people who have one on UKV are raving about it ie single or dual coil wicking but i think its more a case of aesthetics...it really does look nice. Allnamestaken posted up a pic of his a few pages back.

Some specs:

Main Characteristics:
· Material: Stainless Steel Type 316 (half tank is made of clear acrylic with a spare Stainless Steel 316 half tank)
· Diameter: Ø22mm
· Length (including drip tip and connector): 79,5mm
· Length (excluding drip tip and connector): 54,5mm
· Wick type: Silica rope
· Connector type: 510 (M7x0,5mm Pitch)
· Tank capacity 3.7ml

Special Features:
· Single coil or dual coil configurations - Single coil with 2 wicks or 2 coils with a wick each
· Airflow control ring - Fully open will offer a Ø1.5mm hole for airflow
· Juice flow control - By turning the drip tip, you can adjust the flow of juice onto the coil
· Ceramic coil cup - You can choose to not use the coil cup if you prefer
· Re-coiling without emptying tank - Simply invert and unscrew the coil head assembly for re-coiling
· No resistance wire not needed - Careful attention has been made to the ease of setting up a coil in The Rose
· Inverted or regular e-juice filling - Either remove the coil head or the top cap to fill with your favourite e-juice
 
So, chaps... I have a question.

Is there a tank style atomiser that absolutely doesn't leak, holds 2.5ml or more of liquid, and is easy to rebuild?

When I say easy to rebuild what I really mean is that I am *not* good with SS mesh, so anything I can build with cotton or silica really.

And buy doesn't leak I mean chucked in my pocket or bag, or laid on its side, and won't leak everywhere.

Edit: Literally just noticed someone mentioning a spheroid has no chance of leaking. Suspect these are mega money. Off to look :D

Edit 2: That's a lot of money :( The Paps is quite lovely too. I can see bad things happening to my money. Any cheaper options? Save me from myself!
 
Last edited:
So, chaps... I have a question.

Is there a tank style atomiser that absolutely doesn't leak, holds 2.5ml or more of liquid, and is easy to rebuild?

When I say easy to rebuild what I really mean is that I am *not* good with SS mesh, so anything I can build with cotton or silica really.

And buy doesn't leak I mean chucked in my pocket or bag, or laid on its side, and won't leak everywhere.

Edit: Literally just noticed someone mentioning a spheroid has no chance of leaking. Suspect these are mega money. Off to look :D

Edit 2: That's a lot of money :( The Paps is quite lovely too. I can see bad things happening to my money. Any cheaper options? Save me from myself!


The Rose hahaha.......

Honestly it is.


Guys My setup at the moment My Paps and Rose is Over £200 after the shenanigans that happend with my GUS and DID I wont be taking this baby out when I go drinking lol............... I had to wait for 2 months for this ROSE I would cry if i got monkeyed and lost it.
 
whats so good about this rose for it to warrant £120? any reviews out yet?

Honestly mate its the best vape ive ever had.


You can single or dual coil it, you can triple or quad coil it you can do allot more then just dual coil.

The juice flow and air flow control are fantastic. No leaks what so ever can leave it laying on its side all day. I can unscrew the top upside down refil juice without messing with the coil.

I can unscrew the top and redo the coil without emptying the tank.

All of that plus the way it vapes is just lush.

Well worth the one time investment and wait I made.:D
 
Your kayfun will look sex on that Paps :)

Take care of that beat she is demanding.

Forget her beat, im gonna get a beating from the missus tonight when she finds out what i have spent £135 on lol.

Looking forward to it tho, just hope its in pristine condition as the guy has had it for 6 weeks himself.
 
Well done Yas, hope you enjoy it.
You will also need some decent batteries now lol ;)

Yup the spending continues, im using the AW 18350 batteries with the nipple/button top so i imagine those will be ok for the time being??

Was looking at some efest 18350 batteries that are 900mah iirc but wasnt sure of they are any good.
 
efest are ok mate but for a couple quid more get aw. they are far better for the smaller margin

Cheers scorch, ill order some more AW batteries.

Dont know if anyone can help but using an m3 screw and looking at various vids on coiling and ohms reading..it says to do 8 wraps of 32awg kanthal which im using and should give me 1.8ohms but i keep getting 3.2ohms on my provari. Am i doing something wrong?? more wraps means lower ohms or is it less wraps mean lower ohms...bloody confused by all this:p
 
Cheers scorch, ill order some more AW batteries.

Dont know if anyone can help but using an m3 screw and looking at various vids on coiling and ohms reading..it says to do 8 wraps of 32awg kanthal which im using and should give me 1.8ohms but i keep getting 3.2ohms on my provari. Am i doing something wrong?? more wraps means lower ohms or is it less wraps mean lower ohms...bloody confused by all this:p

Iirc you have 28awg Yas, use that, i find it better for microcoils.
 
Iirc you have 28awg Yas, use that, i find it better for microcoils.

I have some but god knows where i put it, ok if i find it does the same apply?? more coils means lower ohms or less coils mean lower ohms. I like vaping at 1.8 ohms as it really gives a nice throat hit i find.
 
I have some but god knows where i put it, ok if i find it does the same apply?? more coils means lower ohms or less coils mean lower ohms. I like vaping at 1.8 ohms as it really gives a nice throat hit i find.

Yep, iirc 9 or 10 wraps will give you 1.8oHms.
If its a lot higher its usually a sign your coils are separated and not touching
 
Status
Not open for further replies.
Back
Top Bottom