Liquid compisition

extrememachine · 7 Oct 2014 at 16:32

Dont remember how much deionised water and coolant I need to add.
is it 10% then 90%??

extrememachine · 7 Oct 2014 at 17:51

Anyone?
Have 5 litre of distilled water and about 1 litre of blue coolant.
How should I go about this?

kindai · 7 Oct 2014 at 18:46

Mix it as per the instructions?

NoNameNoNumber · 7 Oct 2014 at 18:51

O use just DI water with a kill coil?
I'm having no issues

extrememachine · 7 Oct 2014 at 19:16

Just used 1 litre of coolant all of it poured out at the bottom, wondering why this is when all tubeing and compression fittings are tight???
now i have just distilled water about 5 litres.

NoNameNoNumber · 7 Oct 2014 at 19:18

extrememachine said:
all tubeing and compression fittings are tight???

Obviously not quite the case, or you've left a plug out somewhere.

extrememachine · 7 Oct 2014 at 19:22

god damit,re checking everything)

extrememachine · 7 Oct 2014 at 19:35

For some odd reason water is leaking out of the front head of my aquastream pump i cant see anything wrong with the fittings??
I have the 2 fittings for the aquacomputer pump one on top and one in front, then I added a monsoon compression fitting and tubed inside of it.

Am I doing something wrong here?

extrememachine · 7 Oct 2014 at 20:29

Looks like the pump is causing the leaks others have had the same issue?

Jokester · 7 Oct 2014 at 20:31

Which pump?

extrememachine · 7 Oct 2014 at 20:34

aqua computer aquastream advanced edition

Jokester · 7 Oct 2014 at 20:39

What type of fittings have you got on the inlet and outlet? - do they have o-rings?

extrememachine · 7 Oct 2014 at 20:51

Yh those grey o rings and the monsoon compression on top sealed tight.
FYI: the reservoir is leaking just a bit but I securely fitted the tubing and screwed the c. fitting on top??

extrememachine · 7 Oct 2014 at 21:16

Looking back, some of my tube cuts werent COMPLETELY even, could this cause some leaking regardless of how tight a compression fitting is?

Jokester · 7 Oct 2014 at 21:20

The barb on a compression fitting is long enough to cope with irregular cuts assuming it was pushed on as far as it would go. Is it leaking from the nut end, or the thread end?

extrememachine · 7 Oct 2014 at 21:32

leaking from the base of the compression fittings on the reservoir and rads, and on the grey Orings on the aquapump.

Maverick2332 · 7 Oct 2014 at 21:54

Just to double check, which end of the monsoon fittings did you put the o-rings on?

extrememachine · 7 Oct 2014 at 22:03

Maverick2332 said:
Just to double check, which end of the monsoon fittings did you put the o-rings on?

The only way possible, those monsoon fittings screwed ontop of the Grey o ring fttings.
Kind of lost track a bit here o rings are those that block waterpathways?

If so i was refering to the hose extension on the putmp that attaches to the compression fitting

Maverick2332 · 7 Oct 2014 at 22:15

extrememachine said:
The only way possible, those monsoon fittings screwed ontop of the Grey o ring fttings.
Kind of lost track a bit here o rings are those that block waterpathways?

If so i was refering to the hose extension on the putmp that attaches to the compression fitting

Yeah i was referring to the little rubber rings you put on the screw end of the fitting like in this picture (bit hard to see) :

kaku · 7 Oct 2014 at 23:07

Pictures might help of exactly where it's leaking? It sounds a bit complicated.

Liquid compisition

Sgarrista