***The Vapers Lounge*** 2.0

Status
Not open for further replies.
Agree about Scopes (although I thought Triphammer fizzy trifle is quite nice, personal preference) I've been on the apple tart tonight and will be getting more. Have you tried Scopes vanilla custard?

iStick 50W ordered. lol
 
I really need to try more juices! I have vaped the same flavour juice for around 3 months now.

I don't like wasting money on juice I may hate

What companies do 3mg juices? I can't vape 6mg on my drippers they are too strong for me which is a blessing in disguise
 
Last edited:
I'll probably steep the fizzy trifle for a month or so see if it becomes any better.

Not tried their custard yet, i'll order a 10ml bottle to go with 100ml VG heavy apple tart once it's in stock :)
 
kaptainmarc said:
I really need to try more juices! I have vaped the same flavour juice for around 3 months now.

I don't like wasting money on juice I may hate
Click to expand...

Scopes VGH apple tart is probably my favourite juice in the Mutation X, I highly recommend it.

Just started to add up how much I've spent this month on vape stuff and didn't want to know once I got to £500, at this rate I'll have to start smoking again to save money. lol

Not going to buy anything else this month...Except some of Grants vanilla custard next Friday, just to see what all the fuss is about. ;)
 
Last edited:
guys, the locking ring on this new nemesis mod, jesus Christ, its so easy to get stuck, like the threads are smoothe, but you unlock or even lock it fully, and Christ all mighty, even though I don't over tighten it in the slightest I gotta grip it with a cloth and twist it for about 60 seconds then all of a sudden, ping it comes open.

anyone else got a dodgey locking ring? any idea how to stop it doing what its doing, cheers
 
The secret is to loosely grip it betwixt finger and thumb, and it will turn easily :)
Don't force it.

It is a pita though. Grab some magnets and you'll never have to use the locking ring.
 
Uncle Petey said:
The secret is to loosely grip it betwixt finger and thumb, and it will turn easily :)
Don't force it.

It is a pita though. Grab some magnets and you'll never have to use the locking ring.
Click to expand...

haha alright cheers ill giv it a try when it locks again petey.

and bugger magnets, had em in the 4nine, was crap lol.

edit, just looked at a yt video of the nemesis with magnetic switch, it looks to do exactly the same job as the spring but without the locking ring, it could still fire, the 4nine mod, the fire button was inside the tube so it couldn't go off even with just magnets, id not trust the nemesis with magnets without using locking ring my self in my pocket lol :p
 
Last edited:
Also petey, it was your idea with the white nemesis and white vertex and plume veil tip which lead me to getting one with a white mutation x v2 :D haha

always wanted one since I saw the pictures of yours, looks epic, more so with the white chuff tip on the mutation X :)
 
kablooey said:
£31.47 from FT, I might get one actually.
Click to expand...

kaptainmarc said:
I may have to get one come next payday. Had a go with one in my local and I was surprised by how good it felt in the hand.

Perfect size for out and about too
Click to expand...

Fasttech took over two months to deliver my batteries, for the 9 pounds saving; I would rather order it from myepack. :)

Woke up super eailer today so I decided to recoil my tobh.

Vape.jpg


9 wraps of 0.45 kanthal, comes out ~0.5ohm..
There's quite a bit of cotton in there, but its fuffed out and all together a 5mm strip of KDC, havled in thicken; I'm using it on the go so I don't want juice leaking/running out.

The ohm reader I have from FT is quite a bit out, it read the coil at 0.38 while my RDNA reads it at 0.49, and steam engine says it should be 0.5 but it gives me a base to build on.

All set for the day... :)
 
Last edited:
I just saw this a little while ago and it is looking good. I think it's time to move on from the Atlantis, and I'm liking the new airflow inlet, where it's a slot instead of holes.
Kangertech Subtank Plus

The 7ml capacity is twice the standard Atlantis, which means I no longer would have to take juice to work with me.

Also, they are going to sell 0.15Ohm coils for this as well, I hear!
 
Munky1080 said:
I just saw this a little while ago and it is looking good. I think it's time to move on from the Atlantis, and I'm liking the new airflow inlet, where it's a slot instead of holes.
Kangertech Subtank Plus

The 7ml capacity is twice the standard Atlantis, which means I no longer would have to take juice to work with me.

Also, they are going to sell 0.15Ohm coils for this as well, I hear!
Click to expand...

The 0.15ohm coils might be the ni200 ones, not many regulated chips will fire that low.
 
Here it is, the MVP v3. Impressive bit of kit.
I have an MVP v2 but since I changed to Subtanks it became useless only going up to 11W. This fella goes up to 30W.
It's a solid bit of kit. A bit on the heavy side but feels good in the hand. The display is nice and shows everything you need - battery level, wattage, voltage applied and coil resistance - all at the same time.

I like the built in charge cable. Makes it a whole lot more useful as a backup battery for the phone than the old version.

Been vaping on it for the last 30 minutes or so with a 0.6 Ohm RBA in a subtank mini at 20W. Very nice.

680FAHD.jpg
 
I'm not adventurous enough for these custom setups lol

About two months ago I started vaping but I wasn't enjoying it as I bought a basic kit. Last weekend I bought a variable voltage spinner battery and an evod(I think that's the name) tank and haven't had a cigarette since! This setup is much better, stronger taste, harder hit and it even kept me off the cigarettes on a night out :)

Will ser how I get on with this before looking at upgrades. Got Swedish fish at the moment :)
 
As you all know, I love box mods, my very first box mod was the MVP2, but this new one does nothing for me, its bigger and bulkier and I have a friend has had 2 faulty ones already, they just seem to power off and the only way to bring them back to life is to plug in a live usb charging cable... hopefully you wont have this issue, but for the money there are much better lipo box mods in terms of performance which is what i value more.
Between the DNA40, SX350 and the IStick 30w/50w, we can see its not hard or expensive to add a buck, I dont understand why other mod makers cant do this too?
 
Does anyone know the cheapest vendor for a cloupor mini?

FT have them for $28, but would rather go with a UK vendor incase it has issues given the recent reports!
 
Status
Not open for further replies.
Back
Top Bottom