***The Vapers Lounge*** 2.0
- Thread starter slick rick
- Start date
- Status
wow... and I thought I spend too much on vape gear..
I'm trying not buy a zero at the moment, as my car is in the garage again...
got my squape r, a kfl+ with steam turners kit and some bacon cotton today...
impressed with the squape so easy to coil and wick, only used the b deck so far but I have the w desk too. highly recommended for someone whos looking for a high end tank that's easy to get hold of but not a patch on the ubertoot.. the main advantage it has is that it's so customizable with all it's decks and it's glass tank means that I can vape my green crack on a rta at 17w.
sadly it's my last bit of vape mail for a while as I have to buy a car
so all my spare cash will be going into paying that back.
impressed with the squape so easy to coil and wick, only used the b deck so far but I have the w desk too. highly recommended for someone whos looking for a high end tank that's easy to get hold of but not a patch on the ubertoot.. the main advantage it has is that it's so customizable with all it's decks and it's glass tank means that I can vape my green crack on a rta at 17w.
sadly it's my last bit of vape mail for a while as I have to buy a car
so all my spare cash will be going into paying that back.
Last edited:
Every video i've watched says you need to unscrew the 2 screws under the battery cover and pop the screen out to do it.
Looks like i'll have to wait until tomorrow to test the Freemax Starre out properly when the IPV4 arrives, the 30W of the MPV3 isn't even close to being enough to get any flavour out of it even with the 0.5 coil instead of the 0.25
I did it, 2mm Allen key, slacken two screws under battery cover (3-4 turns was enough), lever the casing up and gently work the mirror plate out, it is held in with some small blobs of glue.
I took the mirror finish off with a scouring pad and wd40 and rinsed it off with brake cleaner, its left a kind of frosted finish too it so the screen now appears blurry, still usable but I'll take it back out later this week and polish it until Crystal clear
got my squape r, a kfl+ with steam turners kit and some bacon cotton today...
impressed with the squape so easy to coil and wick, only used the b deck so far but I have the w desk too. highly recommended for someone whos looking for a high end tank that's easy to get hold of but not a patch on the ubertoot.. the main advantage it has is that it's so customizable with all it's decks and it's glass tank means that I can vape my green crack on a rta at 17w.
sadly it's my last bit of vape mail for a while as I have to buy a car
Glad you like the Squape & the cotton bacon
I had 2 LG HG2 18650 3000mAh 20/30A batteries arrive this morning, got a fully charged one in my Sx350 it seems to be working really well using the same temp and joules settings that I was running on my sony vtc5's hopefully the battery life will be a bit longer too
Cheers all
Man of Honour
- Joined
- 13 Nov 2009
- Posts
- 11,665
- Location
- Northampton
Got my Velocity RDA today
1.18ohm build 26 gauge 10 wraps
More than happy with it for my first dripper
1.18ohm build 26 gauge 10 wraps
More than happy with it for my first dripper
Man of Honour
- Joined
- 13 Nov 2009
- Posts
- 11,665
- Location
- Northampton
I think it's just the angle of the photo. Counted the same amount of turns for each coil on the coil master and both begin to glow at the same time when I dry fired it too. Although you could be right as I was aiming for a 1.0 ohm build
Will have another look at it in the morning. Out all night now and the RDA is at home.
Soldato
- Joined
- 19 Jul 2013
- Posts
- 2,731
- Location
- derby
Sigelei has a new 150w T/C mod coming soon
http://greyhaze.co.uk/products/sigelei-150w-temp-control-box-mod
Christ its ugly
http://greyhaze.co.uk/products/sigelei-150w-temp-control-box-mod
Christ its ugly
seems like they cloned all the ugly parts from every mod... lol
The screen layout is still minging...
Soldato
- Joined
- 19 Jul 2013
- Posts
- 2,731
- Location
- derby
It really is utterly vile!
I was hoping they would have put more effort into the styling as mods seem to be getting better looking apart from sigelei. shame as I really like my 150w box its done me well
I was hoping they would have put more effort into the styling as mods seem to be getting better looking apart from sigelei. shame as I really like my 150w box its done me well
Man of Honour
- Joined
- 13 Nov 2009
- Posts
- 11,665
- Location
- Northampton
Id be interested, I don't mind paying P&P and s beer token of too if you have anything I'm interested in
After buying and not using a subtank mini as the 'OOTB' RBA deck is dire, drilling a 2.5mm hole each side of the deck casing and VOILA, the RBA is fantastic.
70 VG juice, 0.6ohms @ 27watts, I got to 11/12 pulls before even an inkling of a dry hit on it's way.
Awesome, a nice convenient tank to use at work. Kanger should really be shipping the decks with these holes already done, the channels are absolutely tiny.
My first attempt at putting it back together saw me completely forget to put the cap of the RBA deck back on, you can probably guess the end result
70 VG juice, 0.6ohms @ 27watts, I got to 11/12 pulls before even an inkling of a dry hit on it's way.
Awesome, a nice convenient tank to use at work. Kanger should really be shipping the decks with these holes already done, the channels are absolutely tiny.
My first attempt at putting it back together saw me completely forget to put the cap of the RBA deck back on, you can probably guess the end result
Broke my Nautilas mini glass last night 
So I need a new tank! (will get replacement glass too but want a new tank)
Looked at the Kanger Sub Tank Mini but I only have the E-leaf istick 30 (20w I think). Has anyone used one with a similar power battery?
Don't want re-buildables, plug an play for me lol.
Cheers.
So I need a new tank! (will get replacement glass too but want a new tank)
Looked at the Kanger Sub Tank Mini but I only have the E-leaf istick 30 (20w I think). Has anyone used one with a similar power battery?
Don't want re-buildables, plug an play for me lol.
Cheers.
If you happen to have a plume veil/sir lancealot or something of sorts, it would be ever most appreciated.
In return maybe I could send you some of by DIY custard & Jungle juice, they've had great feedback thus far
Broke my Nautilas mini glass last night
So I need a new tank! (will get replacement glass too but want a new tank)
Looked at the Kanger Sub Tank Mini but I only have the E-leaf istick 30 (20w I think). Has anyone used one with a similar power battery?
Don't want re-buildables, plug an play for me lol.
Cheers.
I'm using a subtank mini on a 30w cloupor mini, based on my last post, would recommend! The stock coils (0.5/1.2ohm) are good, but depends on how thick your juice is. I wouldn't recommend going above 60% VG with them.
Hey all, apologies been MIA for a bit, popping in on occasion for a quick look at what’s going on. Doesn’t help that I am pretty happy with my 50w stick and UTA2 combo.
However I have started to get an itch, what’s new or upcoming that is worth a look into?
Tommy, I am intrigued by your subtank fix. I liked the atty but anything above 15w I found the RBA just couldn’t keep up due to poor juice channels.
Anyways, hope everyone is keeping well!
However I have started to get an itch, what’s new or upcoming that is worth a look into?
Tommy, I am intrigued by your subtank fix. I liked the atty but anything above 15w I found the RBA just couldn’t keep up due to poor juice channels.
Anyways, hope everyone is keeping well!
- Status