Installing concept software
Please take a few minutes to read this guide as some steps contain important information!
The concept software will initially have to be installed from a PC or a Mac. Later updates to the software will be sent to your Xperia phone "over the air" a few times per month. The tool used to change the software on your phone is Concept Installer.
Note: All your data will be lost when you use the Concept installer on your phone, so make sure to back up all data before installing the concept software. It is possible to migrate data to the concept software. For more information about backup, restoring and migration of data on concept software, read the post linked at the bottom of this post.
Concept Installer can flash (install) the concept software to approved Xperia devices. To flash your phone, follow the steps below.
1. Download and install Concept Installer on your PC/Mac from the link provided below.
PC executable:
https://www-support-downloads.sonym...cept Installer/Concept_Installer_Web_prod.exe
Mac:
https://www-support-downloads.sonym...cept Installer/Concept_Installer_Web_prod.dmg
2. Start Concept Installer. This might take some time.
3. Select the Install Concept Software tab
4. Make sure your phone is powered on
5. Connect your phone and wait for a while.
6. Press Install software. Please be patient, this will take time.
7. Enjoy your new software!
If you face any problems when flashing your phone, please create a post in the category Support - Concept Installer. To be able to look at your specific problem we need you to send an error report by clicking the “Report Issue” in the bottom left corner in the Concept Installer.
Note:
• Xperia phone with unlocked boot loaders are not supported and cannot be flashed.
• All your data will be lost when installing the concept software so make sure to back up all data before you do that.
• To revert back to SONY official follow this instructions
https://plus.google.com/+ZingoAndersen/posts/HzKKy3S4Dsy