Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.
That’s to do with load on the card, different tests put different loads on different parts of the card which results in varying frequencies.Anyone else see discrepancies between the Adrenaline Stress Test and other benchmarking tools? In adrenaline my core hits a consistent 3300Mhz but using say 3DMark it hits between 2600mhz and 2900Mhz on the core
I'd be much more confident if you could do it with software rather than hardware. Someone will probably make it possible with software at some point.I got my 9070 from a high street retailor whose name is similar to an Indian dish. I doubt they would have the expertise to find out what I did if I did try this and it messed up and I returned my card as having developed a fault.
Nothing like morals in life scummy attitute tbh and fraudI got my 9070 from a high street retailor whose name is similar to an Indian dish. I doubt they would have the expertise to find out what I did if I did try this and it messed up and I returned my card as having developed a fault.
What's the consensus for swapping between different 9070XT?
I've got a pulse fitted just now but got a Nitro+ arriving tomorrow. I see you can set factory defaults but part of me thinks play it safe, DDU and start afresh.
I’m yanking your chain hoss - enjoy your gpu!Got this one elsewhere and for under msrp after a hefty discount from elsewhere for being a loyal consumer for the past 20 years… made it worth jumping back on the 9070XT (also Trump tariffs might encourage prices to go up rather than down).
I have a 9070XT Pulse. Great card for sub msrp price I got from elsewhere after a discount.
Vram temps on load max 75c with fans on a curve.
Boosts to 3.2ghz core after an UV of -95mv with PL at 10% and vram fast timings at 2746mhz.
Getting Steel Nomad of 7445 and 74.5fps and Timespy extreme Graphics score of 97.7fps. The Nitro gets 103 according to TPU so 5fps in it- both fan shrouds are plastic not metal- Nitro looks better and your paying 10% more (£619 vs £684 if it’s from the same elsewhere I got my pulse from) for 5% more performance.
It’s really evens what is better- I’d go for whichever you think looks better and you’re happy with in your case.
I’m yanking your chain hoss - enjoy your gpu!
Mine boosting to 3443mhz
Stock is 3010?
Don’t take the foam out, it’s protection for the cable rubbing against the fin stack.Just installing my nitro plus after being in bed with the flu! Ive got a couple of questions.
That bit of black foam where the wires connect - does that want to come out? It's cut and stuck very nicely and securely for something that wants taking off...
The nitro needs 3x8 pin pcie cables...as it's only 340 watts would one 8pin (from PSU) to 8pin (card) and one 8pin (PSU) to 2x 8pin (card) do the job or should I have 3 separate cables?
Thanks
What's the consensus for swapping between different 9070XT?
I've got a pulse fitted just now but got a Nitro+ arriving tomorrow. I see you can set factory defaults but part of me thinks play it safe, DDU and start afresh.
Thanks for the quick reply and glad I asked.Don’t take the foam out, it’s protection for the cable rubbing against the fin stack.
Wouldn’t normally recommend daisy chaining as apparently the Nitro can spike above 400w.
I can't seem to get my pulse to drop below -45mV. I was getting white screens on warzone at 2670mhz fast timings so thought I would leave the nitro+ to be delivered whilst I tinker.I have a 9070XT Pulse. Great card for sub msrp price I got from elsewhere after a discount.
Vram temps on load max 75c with fans on a curve.
Boosts to 3.2ghz core after an UV of -95mv with PL at 10% and vram fast timings at 2746mhz.
Getting Steel Nomad of 7445 and 74.5fps and Timespy extreme Graphics score of 97.7fps. The Nitro gets 103 according to TPU so 5fps in it- both fan shrouds are plastic not metal- Nitro looks better and your paying 10% more (£619 vs £684 if it’s from the same elsewhere I got my pulse from) for 5% more performance.
It’s really evens what is better- I’d go for whichever you think looks better and you’re happy with in your case.
I can't seem to get my pulse to drop below -45mV. I was getting white screens on warzone at 2670mhz fast timings so thought I would leave the nitro+ to be delivered whilst I tinker.
For £60 difference over the 4 years I'll keep it, the difference is nothing. Looks like they hiked the price up to £764 now too
The Pure has a slight OC over the Pulse. The Pulse base clock is 2970mhz.
I can’t get game stable on any more aggressive UV.
Can you share your settings and I’ll try them out on mine?
I'll see what like when I receive it tomorrow. I might hate it and it goes backGood decision. Always go with your heart. It’s going to have to be in your PC a long time.
Same drivers so just turn off your PC and put the new one in. It will pick up the higher clock and powerWhat's the consensus for swapping between different 9070XT?
I've got a pulse fitted just now but got a Nitro+ arriving tomorrow. I see you can set factory defaults but part of me thinks play it safe, DDU and start afresh.