Wow, My spelling is atrocious!! I've been using a crappy Dell keyboard for two weeks and now back on a mechanical keyboard.
-
Competitor rules
Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.
The Radeon RX9070XT / RX9070 Owners Thread
- Thread starter CAT-THE-FIFTH
- Start date
Caporegime
- Joined
- 8 Jan 2004
- Posts
- 32,913
- Location
- Rutland
If you enable FSR4 you'll pull remarkably little power. I sit at 150W roughly at 175FPS/1440P UW. That's gaming laptop levels of TDP.
I shall give that a whirl tomorrow!
Associate
- Joined
- 7 Feb 2019
- Posts
- 80
Is that because you’re hitting a frame rate limit? Uses the same power for me
It'll use the same power if you haven't limited the framerate as it will use the max power of the GPU unless you are CPU limited.
Caporegime
- Joined
- 8 Jan 2004
- Posts
- 32,913
- Location
- Rutland
Yes capped to 175fps.
Associate
- Joined
- 22 Nov 2020
- Posts
- 2,088
Well well...
Well done. Amazing result. Can you share your settings? Are they game stable? Thanks
Just had another run of 8010. 4 points from the top.
-65mv 2810mhz, +10PL
I woke up this morning and wondered if my curve optimiser settings could be playing a factor so reduced from -25 to -15. If I do each core and do some ram tuning, I reckon I could nail this.
Last edited:
Associate
- Joined
- 22 Nov 2020
- Posts
- 2,088
My vram crashes/artifacts at 2800
I’ll try the UV and PL later on tonite and then set the vram at 2800- perhaps I’m at too high UV at -90mv and the core is taking too much leccy.
In the benchmark what does your core boost to?
Last edited:
Associate
- Joined
- 7 Feb 2019
- Posts
- 80
careful with vram in my experience it slows the scores down way before it artifacts / crashes. 2760 seems to be about the limit for most people before scores are impactedMy vram crashes/artifacts at 2800
I’ll try the UV and PL later on tonite and then set the vram at 2800- perhaps I’m at too high UV at -90mv and the core is taking too much leccy.
In the benchmark what does your core boost to?
Resultado: https://ibb.co/xtfR1mcn
Last edited:
Vulkan Memtest is good for highlighting issues before you see them in game. You'll be surprised at what works fine with a benchmark but is actually impacting actual data throughput.
Associate
- Joined
- 19 Sep 2022
- Posts
- 1,081
- Location
- Pyongyang
wrong thread ignore
Last edited:
I was using that and presuming it would tell me when it errored - should i be looking at the data bandwidth as well - it seems to go up and down without touching he OC...
I said I would be happy and done once I cracked 8,000. However, I don't like sitting in second place so I'm going to attempt a RAM OC and per core curve optimising to see if I can get that little extra to get to the top spot. Just 4 points to go. I believe this is knocking on the door of stock 5080 territory?
Last edited:
It won't error as it error corrects but you'll see a big drop in performance once you hit the limit. Mine drops below 600Gb/s when I push it too high and keeps dropping the longer you leave the test running. Stable OCs maintain pretty much the same figures throughout the test, give or take a few Gb/s.
Yes, that's around rtx 5080 stock score.I said I would be happy and done once I cracked 8,000. However, I don't like sitting in second place so I'm going to attempt a RAM OC and per core curve optimising to see if I can get that little extra to get to the top spot. Just 4 points to go. I believe this is knocking on the door of stock 5080 territory?
Weirdly the 5700x3d top 9070xt score is higher with 8131. So in theory 8100+ is possible with the AM4 platform.