samsung memory? what was you doing
-
Competitor rules
Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.
The Radeon RX9070XT / RX9070 Owners Thread
- Thread starter CAT-THE-FIFTH
- Start date
Soldato
- Joined
- 6 Sep 2016
- Posts
- 13,593
Soldato
- Joined
- 6 Sep 2016
- Posts
- 13,593
15 mins of oblivion remastered
Last edited:
Hmm
Did you do a fresh windows install when you went from your 3060Ti?
If not, did you use DDU to remove the Nvidia drivers?
Few things to try if you haven't already -
Although as you say, it probably isn't the cable, if you could try connecting with straight hdmi to hdmi either to current monitor or to a TV just to rule it out 100%
Use DDU in safe mode to uninstall driver and then reinstall.
If you have a spare ssd install windows on it and try with that to see if the issue persists.
I just tried VSR on mine and get lots more options above 1440p.
I did use DDU to get rid of Nvidia drivers and am using DP cable.
I did have to reinstall drivers for my monitor though. After installing my 9070XT and Adrenaline my monitor reverted back to "generic pnp monitor" and max refresh of 60hz.
I did use DDU to get rid of Nvidia drivers and am using DP cable.
I did have to reinstall drivers for my monitor though. After installing my 9070XT and Adrenaline my monitor reverted back to "generic pnp monitor" and max refresh of 60hz.
Is it normal for the screen to go black after you hit apply in the tuning settings? I was seeing what score I could get with the new 7800x3d I just bought,and when I hit apply,the screen went black and I had to force restart the PC
I had it at -150mv when the screen went black,but -80mv was ok
I had it at -150mv when the screen went black,but -80mv was ok
Soldato
- Joined
- 6 Sep 2016
- Posts
- 13,593
150mv is a bit much. Great if it can handle that, but that is a lot. GPU driver crashing .
I think max i got was 110mv and even then driver crashed in certain games.
It can do if you set something too aggressive for your particular card.
Yeah I wasn't going to use it in games,just Timespy.I'm sure I used the same settings a couple of months ago using the 7600x and it was fine,but I could be wrong
Drivers tend to change max UV a huge amount. Initially with a Nitro+ I couldn't complete a Steel Nomad run above -75mV but after a certain driver update, I was able to consistently hit -110mV.
Not ran GTA V yet but heres about 4 hours of DayZ pretty much maxed out at 1080p, correct me if Im wrong but I think the max clocks and power usage might show that GTA V wont give much more in higher temps than what DayZ gives, at least at the resolution I use. I know this will be stock fan curve as it resets itself randomly but I have uninstall Afterburner since this run and it has only reset itself once so far
This was with a UV -50 with Power limit set to max.
All Max values in GPU Z here..
If you are having problems with settings going back to default. Disable windows fast boot. I would also save settings so you can reapply them quickly.Not ran GTA V yet but heres about 4 hours of DayZ pretty much maxed out at 1080p, correct me if Im wrong but I think the max clocks and power usage might show that GTA V wont give much more in higher temps than what DayZ gives, at least at the resolution I use. I know this will be stock fan curve as it resets itself randomly but I have uninstall Afterburner since this run and it has only reset itself once so far
This was with a UV -50 with Power limit set to max.
All Max values in GPU Z here..
If thats the option in Windows Power Settings then its already disabled or are you talking about the BIOS one?
Yea CSM is disabled and PCIE Link is off, will have to check Fast Boot, cant remember what its set at since installing this X670E board in May.. cheers
Last edited:
@WARburton Cant find the Fast Boot or Memory Fast Boot in BIOS, read that EXPO forces it on and doesnt show the option but after multiple reboots I see the fan settings are saving to what I set them to for now, hopefully it stays like this.
Cheers for the info on this guys, appreciate it
Just to note, I have looked at Arctic Freezer 3's again in more detail and they have 38mm rads with 25mm fans so theres no chance of me putting an Arctic rad up top I will look for a new case, at least then I can take my AM4 2200G system out of that old ass Zalman case and put it into this Corsair 400C 
Cheers for the info on this guys, appreciate it
Just to note, I have looked at Arctic Freezer 3's again in more detail and they have 38mm rads with 25mm fans so theres no chance of me putting an Arctic rad up top
I will look for a new case, at least then I can take my AM4 2200G system out of that old ass Zalman case and put it into this Corsair 400C RAM height is also something to look out for with the Arctic AIO's cos of the rad thickness.Just to note, I have looked at Arctic Freezer 3's again in more detail and they have 38mm rads with 25mm fans so theres no chance of me putting an Arctic rad up top