*** The Official OCUK Cinebench R23 Benchmark Thread ***

[Robzere31]

After my cooling issues, I think they may now be sorted. Now the case has been modified & new waterblock fitted, lets see what we can do.

new ST score. 1622
5950x Stock (PBO disabled) max temp 60c

MT score 25139
5950x Stock (PBO disabled) max temp 51c

& stock+PBO

 

[ToOo]

5950x
PBO with custom curve

Multi: 29075
Single: 1640

 

[poxxxy]

Been playing with my hot 3600 tonight . Playing around I peaked at 9908 MC at 4.25Ghz.

 

[Postmodum]

Still working on the Curve Optimization ... just started today so ... still a little confused with this new "world"

Spoiler: CB r23 - original

and a small fine-tune:

Spoiler: CB r23 - Updated

 

[OC2000]

Still working on the Curve Optimization ... just started today so ... still a little confused with this new "world"

Do you mind sharing your Curve optimisation? Im looking into getting something stable 24/7 and find the Curve O will cause restarts randomly especially with light loads.

 

[Postmodum]

OC2000, check the 5950x owners topic, I wrote there my settings/process.

 

[Doco]

Spoiler

Spoiler

okay these images turned out larger than I thought, This is my 5900x on the Dark hero motherboard, custom water-loop, everything is stock on the board - which I believe means PBO is enabled (been on intel since the 2700k so till learning the AMD O.C. stuff), other than that I had my fans at full speed - because my cpu seems to get abit toasty and my ram had XMP so 32GB x 3600Mhz

 

[Distracted]

@humbug are the top 5950x scores really run at stock?

 

[Smiffy-UK]

Here's my R23 and R20 results didn't bother with SC just yet. 5800x is PBO, RAM well you can see that Case fans at 60% and NH-D15 at 1200RPM at 80c.

Spoiler: R23

Spoiler: R20

 

[Weepete]

I just did a run with my new build, mainly to check temps. Muti core test with 5800X and PBO on auto (the similar one in CB is a run I did with PBO set to enabled, which gives me a slightly worse score)

 

[Deluxe1]

New score, 5900x with PBO.

 

[Adrianr]

Sorry no screen with CPU-Z, but 5950x @ 4.5ghz, 3600mhz C18 Corsair LPX. 65C with a Noctua DH-15. Haven't managed a stable run higher than this yet, still playing around. Highest I've managed with PBO/CO so far is 28727 but I'm only on air, and don't fully understand it!

 

[Doug2507]

PBO +75, scaler auto, curve -30 all core, docp 3600c16
23656 multi
1623 single

 

[Mokkameister]

5900X
Default settings - XMP and PBO enabled
1640 SingleCore
22748 MultiCore

MSI MAG X570 Tomahawk WiFi - bios v1.40
32GB Team Group Xtreem "8Pack Edition" 3600 CL16 4x8GB - (MY-095-TG)
Arctic Cooling Liquid Freezer II 360
Seasonic Prime PX-1000

 

[Joxeon]

5800X + B450 tomahawk max
cooler Wraith prism
core +50
curve optimizer -20 all cores
PPT 125 TDC 88 EDC 125
Single 1626
Multi 16022

 

[Doco]

quick question if anyone has a similar issue and found a solution, running r23 my cpu sits all core about 4200mhz, sometimes drop to 4125 and occasionally up to 4225, never higher, but mostly sat at 4200 pretty much the whole time, in case my temps had an issue I ran my fans full, with temps sitting in around 55 give or take 1 degree for the duration of the tesy, when playing games ive seen my all core 4.5 but and even 4.6, but running r23 at no point does the all core go that high

asus dark hero board with 5900x, 2x16gb 8-pack ripped ram, - every setting is default except the ram, xmp 3600 cl16 enabled

 

[Joxeon]

quick question if anyone has a similar issue and found a solution, running r23 my cpu sits all core about 4200mhz, sometimes drop to 4125 and occasionally up to 4225, never higher, but mostly sat at 4200 pretty much the whole time, in case my temps had an issue I ran my fans full, with temps sitting in around 55 give or take 1 degree for the duration of the tesy, when playing games ive seen my all core 4.5 but and even 4.6, but running r23 at no point does the all core go that high

asus dark hero board with 5900x, 2x16gb 8-pack ripped ram, - every setting is default except the ram, xmp 3600 cl16 enabled

Your probably power limited if this is at stock?.

Try enabling PBO and setting motherboard limits.

 

[Doco]

Your probably power limited if this is at stock?.

Try enabling PBO and setting motherboard limits.

I was positive I tried pbo enabled and had the same result, just did that again after your suggestion and all core boost was up in the 43.75-4.4 ranger, multi score was 21.8k - 1k more than I was previously getting, thanks!

 

[Joxeon]

I was positive I tried pbo enabled and had the same result, just did that again after your suggestion and all core boost was up in the 43.75-4.4 ranger, multi score was 21.8k - 1k more than I was previously getting, thanks!

No problem, try also seeing if you can set a negative curve optimizer as this should boost multi thread even more, start at -5 > -10 etc and work your way up till is crashes then dial back to last stable.

 

[Doco]

okay then 2nd attempt at this, pbo enabled, also the dynamic oc mode in the dark hero (set at 45amps), set both ccds to 46.25 @1.32vid, I added +50 to the core in some setting I have forgotten what it was called
ram is xmp 3600 cl16

single - 1633
multi 22950