• Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

***Official Unigine Heaven DX11 3.0 Benchmark Scores***

00016small.jpg

oc-1.jpg


http://www.techpowerup.com/gpuz/wm3fm
http://i102.photobucket.com/albums/m81/Speedy_Pete/OcUK/oc-1.jpg
http://i102.photobucket.com/albums/m81/Speedy_Pete/OcUK/00016.jpg


GPU details in sig
Core 1293MHz
Mem 7574MHz
 
Last edited:
Got a 1552 with my 7850 there now, going to run it again later before posting to make sure it's not an anomalous result, higher than I've ever had before and that's with me dropping the overclock down a bit and the voltage too.
 
And I've realised why my score was so high, only had 2x AA on and not 4x AA.

Here's my proper result, was wondering for ages why I'd not made the top 100 but I accidentally deleted my post so here goes again. Originally I'd posted with 1476 but this one is close enough it makes no difference.

Core 15 750 @ 3.8 GHz teamed with an MSI 7850 Twin Frozr 3 @ 1200 / 5800 at 1.115v

Screenshot of my score



GPU-Z screenshot plus ASUS GPU Tweak screenshot

ihOQDpx9eoK4d.png


itzIoGlKToSdj.png


Validation for GPU-Z http://www.techpowerup.com/gpuz/b425c/
 
Finally managed to crack the 2k barrier!

29CZN.jpg


cpu-4.4
gpu-1130/1600, 1.125v

My gpu clock speeds are PSU limited at these clocks. Go any higher than 1125 on afterburner and my system shuts off ;(
500w

Should be able to hit 1200+ easy with a better PSU. temps are only 72c in heaven.
 
Last edited:
Had these factory-oc'd GTX680s (3-slot design, 6+8-pin) 10 days and finally got around to benching them. Nvidia control panel is set to defaults.
Mobo only supports dual PCI-E 2.0 x16@x8 in SLI. Default clocks were GPU#1: 1189/2378/1502 - GPU#2: 1215/2430/1502.

GPU#1 - POV-TGT GTX680 Ultra Charged (Core: 1215MHz, Boost: 2430MHz, Mem: 1702MHz, Power: 112%, Voltage: 1.175, Temp: 70c@100% fan)
GPU#1 - POV-TGT GTX680 Ultra Charged (Core: 1233MHz, Boost: 2471MHz, Mem: 1702MHz, Power: 112%, Voltage: 1.175, Temp: 58c@100% fan))

CPU - 4.8GHz, 1.42vcore - validation

f0udU.gif

GPU-Z validation

Run #1 GTX680-SLI (all as above)
Score: 3908 - 1680x1050
TZrw0.jpg

Link to full-size

Run #2 GTX680-SLI (all as above)
Score: 3585 - 1920x1080
671wc.jpg

Link to full-size

Run #3 - Single GTX680 defaults clocks (Core: 1189/Boost: 2378/Mem: 1502, PCI-E 2.0 x16)
Score: 2203 - 1680x1050
ZwA1o.jpg

Link to full-size

Can't push these cards much more but I' saving up for a complete new watercooling setup of GPU+GPU+CPU soon. Hoping to keep temps down to the 50c-range and reduce the case fans noise. The memory is on the limit as otherwise I get some green artefacts, upping the core much more simply freezes this PC but I have one other idea. Shame I didn't crack 4k but got very close on air. Doubt even with water I'll reach PCZs score of 4183.
 
Not sure where to put this

My 7970 constantly has problems with OC in games, though it passes stability tests just fine.

Sc2 tonight my game kept freezing so I reset my oc to default and game worked fine. I then put those settings through a stress test, left unigine running for over an hour, played an hour of bf3 and 15 mins of Furmark bench and it passes all of them.

On Mw2 campaign and Starcraft 2 though within moments of starting the game it locks up (driver doesn't crash)
Game works fine using stock, so I don't know the problem. Maybe a driver issue on these games? Using 12.6 beta

Any ideas?

Anyone know of a good amd driver to use for Sc2 stability?
 
Last edited:
Remy87, your score won't count as you need F12 screengrab of benchmark's cobbles to count, that grab does not count here. Plus you'll need GPU-Z + validation. See my recent post for help or consult the official rules below.

dlknight said:
Rules
  1. Results will only be added to the table if they match the settings below!
  2. Include make / model of card to be in post
  3. Include clock settings and voltage used in post
  4. *Updated 23/03/12* - Screenshot from GPU-Z with clock settings and verification link (separate from results screen
  5. *Updated 23/03/12* - Screenshot of results in fullscreen with cobblestones from Unigine (not html report)
  6. *Added 23/03/12* - Screenshots should resized to no more than 1024 pixels wide with a link to original
  7. Results MUST be from version 3.0
  8. NO DRIVER TWEAKING - e.g. enabling performance mode or changing tesselation settings (rendering = Quality, tesselation = application controlled)
[ Link to original post ]
Click to expand...
 
New drivers used and first time O/CING my 680s.

i5 2500k @ 4.5Ghz
2 x MSI GTX680s Core +120 Mem +360 Voltage 100 Fans set @ 80%

4227.png


00021.jpg


driver30448120core360mem.png
 
Last edited:
whyscotty, BodgeITandRun, OCPete, Devious - Done

FMTopfan - nice scores, maybe up yours memory clock on the single GPU run to get more points? see Biffa's result (higher memory clock)

F1aw1ess, wozzsta, remy87, ReAPeR101, StonedPenguin - Rules are on first post :)

Some movement in the tables this time - some new entries into the top 10 and some people demoted to the top 100...
 
Please tell me what I havent done correctly?

Here are the rules

Results will only be added to the table if they match the settings below!
Include make / model of card to be in post: in previous
Include clock settings and voltage used in post: in previous
*Updated 23/03/12* - Screenshot from GPU-Z with clock settings and verification link (separate from results screen: in previous + verification link http://www.techpowerup.com/gpuz/gs8sn/
*Updated 23/03/12* - Screenshot of results in fullscreen with cobblestones from Unigine (not html report): in previous
*Added 23/03/12* - Screenshots should resized to no more than 1024 pixels wide with a link to original: in previous
Results MUST be from version 3.0 : check
NO DRIVER TWEAKING - e.g. enabling performance mode or changing tesselation settings (rendering = Quality, tesselation = application controlled): check
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom