The Fury(X) Fiji Owners Thread

LoadsaMoney · 5 Aug 2015 at 11:49

Shes here!, along with the Haribo

All screws intact

Time to get her fitted!

(should have turned the flash off. nvm)

muziqaz · 5 Aug 2015 at 11:51

ALXAndy said:
Not a problem. He can use the rad as a grappling hook and climb up the hoses !

no no, if the screw is missing as well, he might injure himself

muziqaz · 5 Aug 2015 at 11:52

LoadsaMoney said:
Shes here!, along with the Haribo

All screws intact

Time to get her fitted!

(should have turned the flash off. nvm)

would you look at that, all the screws are in place. And I was about to write up an article about screwgate

Dicehunter · 5 Aug 2015 at 11:57

AMDJoe said:
Yeah I got the joke Boy oh boy is it close to the truth!

New Deus Ex is out next year AFAIK. Been too long since the last one.

Wasn't it meant to come out November this year ?

Mtom · 5 Aug 2015 at 12:08

muziqaz said:
I know what happened to him:
He was waiting by the door for the delivery guy. Once he saw the van pull up, he jumped outside, grabbed the card off of the delivery guy, turned around to see his door has shut on him, and he has no keys. So he is sitting outside right now, hugging his fury x(or Ruby, depending on what make the card is) and waiting till someone from his house comes back from work to let him in

Don't joke on that, a few days earlier i had to walk to the agency for a key in my slippers 'cause the door slammed while i moved the lawn at the front.

AMDJoe · 5 Aug 2015 at 12:35

Mtom said:
Don't joke on that, a few days earlier i had to walk to the agency for a key in my slippers 'cause the door slammed while i moved the lawn at the front.

you moved an entire lawn?

ALXAndy · 5 Aug 2015 at 12:36

AMDJoe said:
you moved an entire lawn?

Don't under estimate the power of Fury X

Lokken86 · 5 Aug 2015 at 12:55

loadsa its been an hour. Any noise?

JediFragger · 5 Aug 2015 at 13:16

Red Red WHIIIIIIIIIIIIIIIIIIIIIIIIIIIINE

LoadsaMoney · 5 Aug 2015 at 13:38

Well managed to squeeze it in at the rear. (ooh err

)

Was that excited, when i plugged everything back in, i forgot to plug my DP cable in, so i booted up with no screen, lmao!, so plugged the DP in, but kept saying no signal detected, so had to restart

She has a whine, but tbh, shes not too bad, and ill probably get used to it, as doesn't sound too bad now tbh, not now that shes been on a bit, and when im gaming/benching, i turn on my Noctua 140mm NFA-14 fan i got on the bottom of my case, and that drowns the whine out, can hardly hear it, can hear that more, and also, when im gaming, ill have my speakers on, so be fine

Ran Firestrike and got :- 13745 (would that be about right @ stock, 5930K @ 3.8GHz ?)

http://www.3dmark.com/3dm/8061549

Shes sitting @ 32 idle, and while FS was running, she only went up to 49

EDIT: Big thanks to these guys for the cracking service, and SWEETS!!!

LtMatt · 5 Aug 2015 at 13:49

LoadsaMoney said:
Well managed to squeeze it in at the rear. (ooh err )

Was that excited, when i plugged everything back in, i forgot to plug my DP cable in, so i booted up with no screen, lmao!, so plugged the DP in, but kept saying no signal detected, so had to restart

She has a whine, but tbh, shes not too bad, and ill probably get used to it, as doesn't sound too bad now tbh, not now that shes been on a bit, and when im gaming/benching, i turn on my Noctua 140mm NFA-14 fan i got on the bottom of my case, and that drowns the whine out, can hardly hear it, can hear that more, and also, when im gaming, ill have my speakers on, so be fine

Ran Firestrike and got :- 13745 (would that be about right @ stock, 5930K @ 3.8GHz ?)

http://www.3dmark.com/3dm/8061549

Shes sitting @ 32 idle, and while FS was running, she only went up to 49

EDIT: Big thanks to these guys for the cracking service, and SWEETS!!!

Glad to hear.

Don't forget to set up Powertune to manage the fan speeds.

Whatever you set the temp target to, the gpu will spend most of its life under load at that temp. So if you set a temp of 52C the gpu will use the up to the maximum fan speed set above in CCC in order to try and keep the gpu at that temp using the minimum amount of fan speed possible to maintain that temp. The higher you set the target temp the slower the fan will need to run. 55c works well for me in single gpu or QuadFire, but you can go lower or higher as you desire.

LoadsaMoney · 5 Aug 2015 at 13:56

AMDMatt said:
Glad to hear.

Don't forget to set up Powertune to manage the fan speeds.

Chers Matt, might give that a go, i'll have to reinstall AB by the looks of it, as not reading the core or memory, has em both at 0, and the sliders fully left, is that normal (thought i would have only have had to have done profiles again) ?

EDIT: The dials on the left are showing core and mem ok, 300/500, its just the sliders.

Grabbed a shot :-

LtMatt · 5 Aug 2015 at 13:58

LoadsaMoney said:
Chers Matt, might give that a go, i'll have to reinstall AB by the looks of it,as not reading the core or memory has em both at 0, and the sliders fully left, is that normal ?

You likely just need to restart or reinstall Afterburner. I use Overdrive these days instead of Afterburner for managing fan speeds. Only when benching do i use Afterburner to set 100% fan speed.

The profiles tab of AB can be useful for applying 50% powertune and an overclock when the pc boots up. Apply overclock at startup does not work, so you need to save the OC to a profile and then apply it via the profiles tab. Just make sure it's stable before you set it up.

LoadsaMoney · 5 Aug 2015 at 14:01

AMDMatt said:
You likely just need to restart or reinstall Afterburner. I use Overdrive these days instead of Afterburner for managing fan speeds. Only when benching do i use Afterburner to set 100% fan speed.

The profiles tab of AB can be useful for applying 50% powertune and an overclock when the pc boots up. Apply overclock at startup does not work, so you need to save the OC to a profile and then apply it via the profiles tab. Just make sure it's stable before you set it up.

Right will try a restart, if not, i'll just reinstall it, be no prob that.

EDIT: Will have to reinstall it.

EDIT: Pump is a pretty loud whine tbh, really loud when i get down on the floor next to it, EEEEEEEEEEEEEEEEEEEE.

FredFlint · 5 Aug 2015 at 14:18

LoadsaMoney said:
Right will try a restart, if not, i'll just reinstall it, be no prob that.

EDIT: Will have to reinstall it.

EDIT: Pump is a pretty loud whine tbh, really loud when i get down on the floor next to it, EEEEEEEEEEEEEEEEEEEE.

Mine is loud as well, its loudest when booting up but is not as bad in windows. The fan is also a noisy ****. I don't hear it most of the time as i have my headphones on.

Lokken86 · 5 Aug 2015 at 14:34

LoadsaMoney said:
Well managed to squeeze it in at the rear. (ooh err )

Was that excited, when i plugged everything back in, i forgot to plug my DP cable in, so i booted up with no screen, lmao!, so plugged the DP in, but kept saying no signal detected, so had to restart

She has a whine, but tbh, shes not too bad, and ill probably get used to it, as doesn't sound too bad now tbh, not now that shes been on a bit, and when im gaming/benching, i turn on my Noctua 140mm NFA-14 fan i got on the bottom of my case, and that drowns the whine out, can hardly hear it, can hear that more, and also, when im gaming, ill have my speakers on, so be fine

Ran Firestrike and got :- 13745 (would that be about right @ stock, 5930K @ 3.8GHz ?)

http://www.3dmark.com/3dm/8061549

Shes sitting @ 32 idle, and while FS was running, she only went up to 49

EDIT: Big thanks to these guys for the cracking service, and SWEETS!!!

Looks good. Graphics score could be a little higher. Overclock the cpu and get windows 10 if your not already and it will be closer to 17k.

JediFragger · 5 Aug 2015 at 14:43

LoadsaMoney said:
Right will try a restart, if not, i'll just reinstall it, be no prob that.

EDIT: Will have to reinstall it.

EDIT: Pump is a pretty loud whine tbh, really loud when i get down on the floor next to it, EEEEEEEEEEEEEEEEEEEE.

If it doesn't irritate you now, it will in a few weeks/months

Geeman1979 · 5 Aug 2015 at 14:44

Yup! soon as the honeymoon periods over.

LoadsaMoney · 5 Aug 2015 at 14:49

Geeman1979 said:
Yup! soon as the honeymoon periods over.

just been blasting GTA V, couldn't hear it when i was playing that, frames seem all over the place though, and not as smooth as it was on my 290, seemed a bit stutter, as one minute i could be belting aloing at 70+, then it would crash to 48/50, stutter split second, then frames shot up again.

Gona be RMA'ing i think, can't be doing with it EEEEEEEEEEEEEEEEE when im browsing.

Geeman1979 · 5 Aug 2015 at 14:53

LoadsaMoney said:
just been blasting GTA V, couldn't hear it when i was playing that, frames seem all over the place though, and not as smooth as it was on my 290, seemed a bit stutter, as one minute i could be belting aloing at 70+, then it would crash to 48/50, stutter split second, then frames shot up again.

Gona be RMA'ing i think, can't be doing with it EEEEEEEEEEEEEEEEE when im browsing.

I don't blame ya, I wouldn't put up with that ****.

Relieve yourself of all this madness

https://www.overclockers.co.uk/showproduct.php?prodid=GX-057-IN&groupid=701&catid=1914&subcat=1402

What monitor are you running?