just got my ocuk 3800 X2 good stepping?

cyclopopcicle · 26 Jul 2006 at 14:13

what is the chance of getting a high clock from this?
ADA3800DAA5BV
LDBFE 0623WPEW
Z947659F61347

cant fit yet to try

dC2006 · 26 Jul 2006 at 17:57

Hi got my x2 3800 today LDBFE 0623WPEW

does 9x300 1:1 with ram @ 2.5-4-4-7 using artic 64 pro cooler

aardvark · 26 Jul 2006 at 19:33

thats nice to know

i've got a LDBFE 0623WPCW

but will hold off overclocking for a few days just to see how its working - i'll let you know how it goes.

dC2006 - any reason why you went for a 9 multiplier?
i've just seen your ram at 1:1 - is that right? 300 seems very high for ram - what have you got?
if i could get 2700 i would be very happy

Biglunn · 26 Jul 2006 at 19:50

dC2006 said:
Hi got my x2 3800 today LDBFE 0623WPEW

does 9x300 1:1 with ram @ 2.5-4-4-7 using artic 64 pro cooler

WOW... thats an excellent overclock on air. 2.7Ghz running on a 300Mhz Fsb & Memory timing must give you one nippy PC! That Geil Ultra memory you have seems absolutely fantastic!

I got my x2 3800+ today. Its a LDBFE 0623 XPMW. As above, Im just leaving it stock for a few days to make sure all is stable. Only thing Ive installed is the Dual Core Optimizer and so far so good.

man_from_uncle · 26 Jul 2006 at 19:56

That must be a 2x512 set. I've not seen a 2 gig set get 300 fsb at only CAS2.5.

Minstadave · 26 Jul 2006 at 19:58

man_from_uncle said:
That must be a 2x512 set. I've not seen a 2 gig set get 300 fsb at only CAS2.5.

Yeah it'll be a TCCD based 2x512mb set.

Doppleganger · 26 Jul 2006 at 20:29

dC2006 said:
Hi got my x2 3800 today LDBFE 0623WPEW

does 9x300 1:1 with ram @ 2.5-4-4-7 using artic 64 pro cooler

Do X2 3800's come with a 9x multiplier? I thought they were all 10x?

Biglunn · 26 Jul 2006 at 20:35

I presume one can reduce the multiplier, its locked upwards (i think)

dC2006 · 26 Jul 2006 at 20:54

yes its 2 sticks of 512mb, bought from ocuk

Geil pc4400 ultra-x tccd, it could do 9x310 1:1 @ 2.5-4-4-8 with my opty 144.

Cal_G · 26 Jul 2006 at 21:54

Ordered mine from a competitor yesterday, delivered this morning

Went straight for 10x260. Boots into windows fine and seems ok, ran S&M and it locked the computer up in 30 seconds, no error messages, just a total lock up. backed off to 10x250 ran the same torture test on both cores and it passed with flying colours

Temps on both cores reached 62 degrees! didnt seem to effect stability in the slightest but still a bit toasty. Not suprising really seeing as I am unable to sit in the room with the computer as it's far to hot, using a scythe ninja and a yate loon 44CFM fan (not the best but its totally silent

).

Hoping I can reach 2.6 when the weather cools a bit so I can run my 3500ll at 1:1 on the 166 divider.

Probably needs more VCORE but the best I can give it is 1.4 due to using the dual-sata2. 25% overclock isn't bad for a chip just over £100

cyclopopcicle · 26 Jul 2006 at 21:54

got it at 2.5 stable so far
so just a little short of my 146 at 2.6
so quite happy, will try more another day

Cal_G · 26 Jul 2006 at 22:22

cyclopopcicle said:
got it at 2.5 stable so far
so just a little short of my 146 at 2.6
so quite happy, will try more another day

What are your temps like mate?

Cheers

cyclopopcicle · 26 Jul 2006 at 23:07

52 load
36 idle

A.N.Other · 27 Jul 2006 at 00:08

That's some nice work people! Give me you're OC stats and I'll stick you in this table ... it hasn't had much love recently

Credo · 27 Jul 2006 at 08:03

Not so happy here - mine is a LDBFE 0623WPEW as well, it runs fine at 10x220, but won't boot into Windows at 10x240, which I was hoping for. Speedfan shows Core 1 at 1.31 Vcore, but core 2 at 1.17 vcore? What's going on here? I don't like upping the vcore much, so I tried it at 1.35 in the BIOS (i.e. not at Auto) and it made no difference.

My RAM happily did 250 on my 3700 SD, and I'm running the same timings, I've flashed the BIOS to the latest DFI one (329)...

Not happy

Dutch Guy · 27 Jul 2006 at 09:28

A.N.Other said:
That's some nice work people! Give me you're OC stats and I'll stick you in this table ... it hasn't had much love recently

Just a shame there is no stepping information in that otherwise excellent table.

I will post in this thread as well as soon as I get my X2-3800+

Credo · 27 Jul 2006 at 10:43

Anyone use Speedfan and see their second core running at low vcore? Mine is reporting 1.17v :eek:

dC2006 · 27 Jul 2006 at 11:24

Hi, noticed one problem with going from single core to dual core, heat ! Even getting my x2 3800 stable at 2.7ghz I found out that what ever I ran, prime, superpi32, games etc.. after about 40mins - 1hr i would get a crash, which most likely means some component getting very hot and making system unstable. Or the cores just making each other unstable due to heat. I guess this is when water cooling kicks in and air cooling phases out. At 2.6ghz there are no problems.

Compared to my opty, if I put my hand over the case blow holes, the warm air is much warmer than before.

Dutch Guy · 27 Jul 2006 at 12:12

My 3800+ was delivered just now so I will be testing tonight :cool:

I think the CPU will be at stock speed for under 5 minutes

straight to 2.5Ghz or more :cool:

Credo · 27 Jul 2006 at 12:19

Dutch Guy said:
My 3800+ was delivered just now so I will be testing tonight

I think the CPU will be at stock speed for under 5 minutes straight to 2.5Ghz or more

Nice one - is the stepping a LDBFE 0623WPEW like mine? If you can, have a look at what the vcore is on both cores. It's like my 2nd core is in power saving mode or something...