Hi all,
I completed my first custom loop (as well as first PC build in 7 years :eek:!) And I thought I'd share the love as you guys have been awesome and I love this community. Here are a few photos and a couple of fun videos (subjective :p)
Specs
CPU: AMD Ryzen 7800x3D
RAM: Corsair Dominator...
Morning guys, im wondering whether to do a custom loop, for two reasons to cool the cpu better than my existing AIO and the other they look cool as!
Ive never done one before, ive got an i9 13900 with a Lian Li O11D Mini case.
Where to start? Any advice would be cool (pun on purpose)
Hello All,
I've decided to scratch the itch I have to do a custom loop in the hope it'll go away.
I've searched threads here and seen a few videos thus far.
Can you please comment on the component choices, any better for this setup or better priced alternatives there might be out there? Any...
Hi,
I have the following plan:
Rads
2 x EK-CoolStream PE 360 (1 facing front, 1 facing top_
1 x EK-CoolStream XE 240 (1 at the bottom of the case)
Blocks
1 x EK-Quantum Momentum ROG Strix X570-E
2 x EK-Quantum Vector Strix RTX 2080
I was trying to calculate the pressure based on the amount...
ok guys so i need your opinion on something
i bought a EK D5 pump second hand and the person who i bought it off re crimped the cable so it goes directly into the peripherals port on the PSU instead of via molex (pictured below)
https://imgur.com/7bAZrnd
https://imgur.com/4gIejFV
i have an...
Hi. I plan to make custom case using 3d printer with custom LC, but there are problems. One of the features of this case will be that it can be moved/tilt in any way (upside down, on side etc.).
So the problem will be air in reservoir and pump as:
Can anyone give me any advice how to solve...
Hi All
I know that the GTS is considered the benchmark for rads, does anyone know how the new V.2 NexXxoS compare? I've not been able to find a direct comparison anywhere.
I am going to be using 2x with Vadar EVO (700-1150rpm) for a single gpu + cpu with D5 custom loop
Thanks
G
Hello,
I have a standard cpu AIO attached to a 240mm radiator, pump in the cpu block as usual.
Questions is... Can I take off the tubes that are on it and drain the water and then replace the tubes with flex ones and have it part of a custom loop?
E.g res/pump combo ----> cpu block (with pump)...
OK, so I have been toying with the idea of having a mineral oil cooled PC in a faux fish tank, to serve as something interesting to look at and also do some light HTPC duties (Netflix, steam in home streaming, basic browsing) and I came across a great blog by Puget Systems. It's very...
Hey everybody!
I recently finished up on my Meshify C casemod. Here are the final pictures!
Big shoutout to Fractal Design, EK Waterblocks and Cablemod for their trust and support!
Specs:
Case: Fractal Design Meshify C
Motherboard: Asus Z270E
GPU: Asus ROG Strix GTX 1080ti
CPU: Intel...
Hello guys and girls
I'm new to these forums and i'm seeking some advice (a lot of YouTube videos seem to be people shilling for companies as far as i can tell)
A bit of background.
I'm a 3D artist by day, and i run a Cinema4D training website and YouTube channel (here are the links for...
Hi guys, it seems that I have some really strange issue with my CPU temp.
Long story in short:
Mobo: Asus R6E, bios: 1002
CPU: 7900X - non delided - Water block (EK CPU+VRM combo unit)
GPU: Strix 1080 TI - Water block (EK Block)
Cooling loop: Full custom loop, 360PE(45mm) + 360SE(30mm) + EK 140...
Hi All,
Does anyone have any ideas as to when the VUE coolant from primochill will be out.
I have seen the tweet at the start of september stating it will be out around 30 days which lands us around current day for release.
It is awesome looking stuff that I'd love to put in my build so...
Hi Guys,
I am about to start building my 8700k/1080ti rig but I'm currently waiting for the asus formula mobo to come out. This will be my first custom loop build and I want to make sure it is easily capable of handling all the hardware and overclocks.
For a bit of context I intend to cool...
recently I want to build a custom loop for my PC system. And meanwhile, this case have been released. So here is some questions that I want to ask:)
First, here is my target build(Sorry for terrible hand drawing:()
All components I would like to use EKWB
and later is some questions I want...
I'm getting hardline loop with 3x ek pe 360mm rads, asus Ix formula motherboard block, ek elite 1151 cpu block, alpha cool m.2 water block, 1080ti ekwb waterblock, is one ekwb pwm elite Ddc pump res combo enough?
Hi,
I'm twisting my head around trying to figure out a water cooling set for my PC...
My current setup is an overclocked i7-5960X at 4.5GHz and 4GPUs (2x GTX 1080Ti FE and 2x GTX 1080 FE). I need to watercool the two 1080Ti cards first and foremost, though throwing the CPU into the mix...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.