3770k + z77 sabertooth 0x124 bsod

[vonex]

Yeah 2133 those timings are good. Maybe try TRAS 21. Rest are fine

stable at 9 10 10 21 88 1.5v, any suggestions on getting tighter timings?

 

[8 Pack]

Tune the secondary timings to these working down the bios. This is ideal- 5-88-auto-12-6-26-6-5-7.

 

[vonex]

bought new cpu and sold my old 1 on well known auction site,
running at 4.7ghz @ 1.416vcore cpu pll 1.65v vccsa 1.0625v, pch 1.09v.

4.6 at 1.32v my old chip only needed 1.232 for 4.6 but could not run 4.7

temps are skyhigh! ran prime for 6hours max temp was 93c!

 

[8 Pack]

6 Hours!!! Is your PC's primary use Prime??? well 5.5 hours wasted there then!!! 1.41 is too much for 24/7 to be honest at 90+ C.

 

[vonex]

6 Hours!!! Is your PC's primary use Prime??? well 5.5 hours wasted there then!!! 1.41 is too much for 24/7 to be honest at 90+ C.

not what i wanted to hear... dont think i can get the vcore down at all with out getting WHEA errors, i'll try and reseat the cpu block inabit just to make sure there is no air bubbles in the paste.. cant find my mx4 so only got as5 to hand!

i'm an online gamer so need my system to be stable for good amount of time, nothing worse then bsod when in the middle of intense pwnage

 

[8 Pack]

Well play your games to test then!!!

Prime is a waste of time for you!!! it only shows your system can run prime!!

GPU is your main focus for gaming not CPU. Dial it back a touch.

 

[vonex]

currently running at 4.5ghz at 1.25 untill i can sort this heat issue out

 

[OptimaLnrg]

Sorry to hijack but how would I go about making a tiny bump to the memory controller voltage on this board without the vccio option?

Small bump to the vccsa?

 

[vonex]

yup, VCCSA and VCCIO are linked together on this board, it matches VCCIO to what value you set on VCCSA

 

[clayer]

ready to overclock need help

hi guys need help to overclock my rig tried many times before not to sure what settings to change my 3.9ghz in prime top temp 46c all fans silent twin d5 setting 1 would like to reach 4.5 24/7
read dozens of forums posts but more i read the more confusing it gets.
can anyone give me some settings to try out for starting dont think heat will be an issue.
thanks.

 

[8 Pack]

yup, VCCSA and VCCIO are linked together on this board, it matches VCCIO to what value you set on VCCSA

This is not correct. They are are divider of each other not the same!!

VCCSA 1.10v VCCIO 1.05v.!

 

[8 Pack]

hi guys need help to overclock my rig tried many times before not to sure what settings to change my 3.9ghz in prime top temp 46c all fans silent twin d5 setting 1 would like to reach 4.5 24/7
read dozens of forums posts but more i read the more confusing it gets.
can anyone give me some settings to try out for starting dont think heat will be an issue.
thanks.

Set the D5's to 3. Still silent but push some real fluid!!!

 

[OptimaLnrg]

This is not correct. They are are divider of each other not the same!!

VCCSA 1.10v VCCIO 1.05v.!

I thought it would be a little more complicated than matching them.

What value should I set for VCCSA to get myself VCCIO of 1.1v? (my mem is stable overclocked @1866 with a 1.1v vccio)

 

[vonex]

This is not correct. They are are divider of each other not the same!!

VCCSA 1.10v VCCIO 1.05v.!

thanks for clearing that up 8pack

 

[8 Pack]

Hi mate

I am sure I assisted you with this in another area of the forums.

 

[vonex]

i took your advice on the chip running to hot and decided to delid it, just got round to applying liquid pro and omg what good results, i was seeing 95C at the same point with intel paste.

 

[OptimaLnrg]

Hi mate

I am sure I assisted you with this in another area of the forums.

Is this for me?

I don't think so, this is the first time I've o/ced since I bought the board

 

[8 Pack]

No it was for Clayer.

1.1 VCCSA is 1.05 VCCIO. For 1866 you should not need 1.1 even with SB.